Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Sanctuary Series


757.498.6118 Ext - 109SSE LA - Call for pricing - 400 watt Curved Line Array


PDFSSE LA Spec Sheet (pdf)

The SSE LA is a compound-radius, curved line array that provides a controlled and contoured vertical coverage pattern for improved intelligibility in larger or more reverberant spaces. Its dual-coverage pattern provides a tight 20° vertical coverage for the primary long-throw pattern and a 40° vertical coverage for the secondary near-field pattern. The smooth curve of the array allows the SSE LA to be flown much lower than most “J” arrays, increasing the flexibility and utility in spaces with lower ceilings. Adding to this versatility, an attenuation switch for the near-field pattern reduces the output so that it does not overpower the audience just below and in front of the array.

Constructed of premium birch plywood for strength, rigidity and light weight, the SSE LA has a perforated metal grille covered with cloth for a subdued appearance. Built-in Flying Points allow flexibility in coverage angles while providing stability.

The SSE LA mid-high curved array is comprised of sixteen 2" neodymium speakers with wide bandwidth and a very smooth response across their operating band. When mated with a companion woofer module, the combination provides a clear, smooth full-range sound from a flown system. Input to the array is via barrier strip screw terminals. An optional active crossover with equalization ensures smooth, consistent frequency response across the operating band.


  • Sixteen 2" high-performance speakers
  • Dual radius curve provides long throw and near-field coverage from one enclosure
  • Controlled vertical coverage pattern improves intelligibility in larger spaces
  • Increased flexibility of flying height with dual pattern
  • Near-field pattern attenuation switch for improved flexibility
  • Processor based crossover and EQ for maximum performance
  • Barrier strip inputs
  • Flying points included for suspension
  • Available in black and off-white finishes

Architectural and Engineering Specifications

The loudspeaker system shall have an operating bandwidth of 174 Hz to 18 kHz with signal processing. The nominal output level shall be 93 dB when measured at a distance of one meter with an input of one watt. The nominal impedance shall be 8 ohms. The maximum continuous power handling shall be 200 watts, maximum program power of 400 watts and a peak power input of at least 800 watts, with a minimum amplifier headroom of 3 dB. The system shall utilize sixteen 2 inch wide-band speakers in a dual-radius, curved pattern, and the bottom four speakers shall have the option of providing 6 dB of output attenuation. The nominal radiation geometry shall be 130 degrees in the horizontal plane and 60 degrees total in the vertical plane. The overall outside dimensions shall be 38.5 inches high by 3.5 inches wide by 10.13 inches deep. The weight shall be 12 pounds. The loudspeaker system shall be a model SSE LA.

Frequency Response (±3dB) 174 Hz–18 kHz Power Handling 200 W cont. / 400 W prog. / 800 W peak
Frequency Range (-10dB) 148 Hz–18 kHz Crossover Frequency 200 Hz
Sensitivity 1 W/1 m 93 dB Nominal Impedance 8 Ω
Max SPL/ 1m (calc) 122 dB Minimum Impedance 6.8 Ω
Coverage (HxV) 130° x 60° Transducer Complement (16) neodymium 2" wide-band speakers with 1" voice coil
Input Connections (1) 4-pin Neutrik Speakon, (1) two-position terminal strip Mounting Provisions (6) 3/8"-16 threaded mounting points, (1) ¼"-20 threaded mounting point on back-bottom, (4) ¼"-20 threaded mounting points on bottom for Versamount
Enclosure Material Birch plywood w/ painted or natural finish
Dimensions (HxWxD) 97.8 x 8.9 x 25.7 cm
(38.5" x 3.5" x 10.1")
Weight 5.5 kg (12 lbs)
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or