|
Products
|
Peavey CS 800X4 CS 800X4 - Call for pricing - Power Amplifier - 00510950Downloads
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CS 800X4 Manual (pdf)| Specifications | |||
| 2 Ω | 4 Ω | 8 Ω | |
| Rated Output Power - 1 kHz, <0.02% THD, Four Channels | 400 W | 300 W | 180 W |
| Rated Output Power - 1 kHz, <0.02% THD, Sing. Channel | 500 W | 350 W | 200 W |
| Bridged Output Power - 1 kHz, <0.025% THD | - | 825 W | - |
| Maximum RMS Voltage Swing | 45 V | ||
| Voltage Gain - ref. 1 kHz | 32 dB | ||
| Power Bandwidth (+0/-3dB, @ rated power) | 10 Hz–50 kHz | ||
| Frequency Response (+0/-1dB, @ 1W) | 10 Hz–20 kHz | ||
| Input Sensitivity | 0.720 V | 0.865 V | 0.940 V |
| Input Impedance - balanced | 15 kΩ | ||
| Crosstalk (A-weighted) | > -60 dB | ||
| THD @ rated power | < 0.2% | < 0.1% | < 0.1% |
| IMD-SMPTE - 60 Hz, 7 kHz | < 0.1% | ||
| Slew Rate | 7 V/μs | ||
| Hum and Noise (A-weighted) | > -108 dB | ||
| Damping Factor @ 20 Hz–400 Hz | > 400:1 | ||
| Input CMRR @ 1 kHz | > -93 dB | ||
| Power Requirement | 240V, 230V or 120V AC; 50–60 Hz | ||
| Current Draw @ 1/8 power | 930 W | 640 W | 420 W |
| Current Draw @ 1/3 power | 1995 W | 1365 W | 795 W |
| Idle Current Draw | 60 W | ||
| Cooling | 80 mm DC fan, off until heat sink reaches 45° C, then variable speed | ||
| Controls | 4 attenuators, 2 mode select switches | ||
| Indicator LEDs | 4 DDT™, 4 Signal, 4 Power/Status | ||
| Protection | Temp, DC, turn-on transients, improper load or shorts | ||
| Connectors | Combi XLR & 6.3 mm input, Speakon® and Binding Post speaker output, IEC mains connector | ||
| Construction | 16 GA steel w/ cast aluminum front panel and steel grille | ||
| Dimensions (HxWxD) | 8.89 x 48.3 x 37.6 cm (3.5" x 19.0" x 14.8") | ||
| Weight | 17.37 kg (38.3 lbs) | ||
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or
757.498.6118 Ext - 109, Or
More Info