|
Products
|
Peavey CS 4080HZ CS 4080HZ - Call for pricing - Power Amplifier - 00511200Downloads
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CS 3000/4000/4080HZ Manual (pdf)| Specifications | |||
| 2 Ω | 4 Ω | 8 Ω | |
| Rated Output Power - 1 kHz, <0.05% THD, Dual Channel | - | 2040 W | 1250 W |
| Rated Output Power - 1 kHz, <0.05% THD, Sing. Channel | - | 2450 W | 1400 W |
| Bridged Output Power - 1 kHz, <0.1% THD | - | - | 4080 W |
| Maximum RMS Voltage Swing | 115 V | ||
| Voltage Gain - ref. 1 kHz | 32 dB | ||
| Power Bandwidth (+0/-3dB, @ rated power) | 10 Hz–35 kHz | ||
| Frequency Response (+0/-0.75dB, @ 1W) | 10 Hz–100 kHz | ||
| Input Sensitivity ±3% for 1 kHz | - | 2.25 V | - |
| Input Impedance - balanced | 15 kΩ | ||
| Crosstalk @ 1 kHz, rated power | > -70 dB | ||
| Phase Response @ rated power | +5° to -12° | ||
| THD @ rated power | - | < 0.1% | < 0.1% |
| Slew Rate | > 15 V/μs | ||
| Hum and Noise (A-weighted) | > -108 dB | ||
| Damping Factor @ 20 Hz–1 kHz | > 500:1 | ||
| Input CMRR @ 1 kHz | > -75 dB | ||
| Power Requirement | 240V, 230V or 120V AC; 50–60 Hz | ||
| Current Draw @ 1/8 power | - | 1185 W | 720 W |
| Current Draw @ 1/3 power | - | 2975 W | 1835 W |
| Cooling | Two back panel temperature dependant variable speed 80 mm DC fans | ||
| Controls | 2 front panel attenuators, rear panel Mode switches | ||
| Indicator LEDs | 2 DDT™ (clip limiting), 2 Signal, 2 Status | ||
| Protection | Thermal, DC, turn-on bursts, subsonic, incorrect loads | ||
| Connectors | Combi XLR & 6.3 mm input, Speakon® and Binding Post speaker output, 15 amp IEC mains connector | ||
| Construction | 16 GA steel w/ cast front panel and cast handles | ||
| Dimensions (HxWxD) | 8.89 x 48.3 x 37.6 cm (3.5" x 19.0" x 14.8") | ||
| Weight | 21.45 kg (47.3 lbs) | ||
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or
757.498.6118 Ext - 109, Or
More Info