Loyola Enterprises

A veteran and minority owned SDB Certified Business.



757.498.6118 Ext - 109TX1152FM - Call for pricing - 15-inch two-way vertical floor monitor


PDFTX1152FM Specifications (pdf)

PDFTour X Series Brochure (pdf)

With an undeniable combination of functional good looks, compact design and engineering breakthroughs, Tour X FM will redefine the world of stage monitors for years to come. The TX1152FM advances the legacy of the globally accepted EV FM series and applies a healthy dose of innovative Electro-Voice engineering.

The TX1152FM enclosure utilizes Signal Synchro Transducers™ (patent pending), a design that aligns the woofer and compression driver by locating them on separate baffles, and integrates a low distortion port between the baffles. This offers tremendous advantages over traditional flat baffle construction: the acoustic centers of the woofer and compression driver are closer together, synchronizing arrival time; The voice coils of the compression driver and woofer are in the same plane, achieving linear phase response; and the size of both baffles are smaller than a single baffle; resulting in a smaller footprint.

The TX1152FM utilizes the DH3, a high output 1.25" titanium compression driver, coupled to a Constant Directivity™ 90° x 50° horn. The SMX2151 15" woofer has an FEA optimized magnet structure and shorting ring for ultra low distortion. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, and has a built in protection circuit for long term reliability. The combination of the transducers, enclosure, and crossover result in a compact floor monitor that is capable of very high output levels before feedback.

The TX1152FM has a variety of features that make it suited as a dedicated floor monitor. The internally braced enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat™ for maximum strength and durability. The unique Backbone grille design not only looks great, but is very strong and dent resistant, and features a rotatable logo. Four way handles allow for gripping the TX1152FM in a variety of positions. The recessed input panel with dual NL4 connectors is located on the rear of the enclosure, which keeps the connectors hidden and away from the performers on stage.


  • 55° Vertical Floor Monitor with Signal Synchronized Transducers™
  • 100 dB Sensitivity, 133 dB Maximum SPL
  • DH3 1.25" (32mm) Diaphragm, 1" (25mm) Exit Pure Titanium Compression Driver
  • SMX2151 15" (381mm) LF Transducer with Fully Symmetric Drive
  • Integrated Crossover with Steep 24 dB/Octave Slopes and HF Protection
  • 90° x 50° Coverage Pattern
  • 500W Continuous (2000W Peak) Power Handling

Frequency Response (-3dB) 65 Hz–20 kHz Power Handling 500 W cont. / 1000 W prog. / 2000 W peak
Frequency Range (-10dB) 45 Hz–20 kHz Crossover Frequency 1750 Hz
Sensitivity 1 W/1 m 100 dB Rec. High-Pass Freq. 45 Hz
Max SPL/ 1m (calc) 133 dB Nominal Impedance 8 Ω
Coverage (HxV) 90° x 50° Minimum Impedance 6.2 Ω
Connectors (2) Neutrik Speakon NL4’s Transducers (LF/HF) SMX2151 / DH3
Enclosure Material Plywood and MDF w/ EVCoat™ finish Grille 16 GA steel, black powdercoat
Dimensions (HxWxD) 47.5 x 43.9 x 65.5 cm
(18.7" x 17.3" x 25.8")
Weight 23.5 kg (51.9 lbs)
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or