Loyola Enterprises

A veteran and minority owned SDB Certified Business.


Electro-Voice TG5

757.498.6118 Ext - 109TG5 - Call for pricing - Power Amplifier


PDFTG5 Specs (pdf)

PDFTour Grade Brochure (pdf)

PDFTour Grade Manual (pdf)

Tour Grade amplifiers are designed for today’s most demanding audio applications. They offer a unique combination of high output power, sonic excellence, high efficiency, as well as state-of-the-art, optional signal processing and system supervision via IRIS-Net software, in a compact lightweight format.

The TG-5 Tour Grade amplifier has a microprocessor controlled operation management system that provides useful features such as compound thermal management (preventing the unit from switching off in excessive thermal environment), automatic mains voltage detection and a circuit breaker control that allows the TG-5 to operate on a 30A (120V) or 16A (230V) circuit breaker with normal music signals.

The TG-5 uses a grounded bridge 3-step class-H topology to ensure the highest acoustic performance and reliability. The TG Series also offers the power and transient response to drive subwoofers along with the low distortion for critical HF signals. The high capacity switch-mode power supply provides the headroom needed to ensure high dynamic outputs and reliable operation on extreme low loads.

Optional IRIS-Net™ (Intelligent Remote & Integrated Supervision-Network™) Modules available for the TG-5 amplifiers enable state-of-the-art DSP, remote control, networking and unique system supervision – down to an individual loudspeaker component. IRIS-Net™ software is an expandable, open architecture application that operates under Windows™ and supports Ethernet, CobraNet™, CAN-Bus, USB, and RS-232 interfaces. Several modules are available including the: RCM-26 (DSP, AES/EBU input, GPIO, CAN-Bus), RCM-28 (DSP, GPIO, CobraNet™) and the RCM-20 (no DSP, CAN-Bus). The modules enable different levels of control and monitoring of the amplifier. The connection of the TG-5 to a PC running IRIS-Net software can be achieved using a UCC-1 USB-CAN interface and/or a N8000 digital matrix.


  • Up to 2 x 1900W into 2 Ohms
  • Grounded Bridge Class-H Design
  • Microprocessor Controlled
    • Compound Thermal Protection
    • Auto Mains Input Voltage Select
    • Mains Circuit Breaker Supervision
  • Front LCD-Panel for Operation Mode Set-Up and Monitoring
  • Slot for Optional IRIS-Net™ Compatible Control Module
    • Complete PC Control (CAN, Ethernet)
    • State-of-the-art Real Time DSP (RCM26/28)
    • Unique System Diagnostics and Supervision
    • Compatible with all other IRIS-Net Compatible Hardware
  • Complete Protection Package
  • Only 14.2 kg (31.4 lbs)

2 Ω4 Ω8 Ω
Max. Midband Output Power - THD=1%, 1 kHz, Dual Channel 1900 W 1450 W 850 W
Rated Output Power - THD <0.1%, 20 Hz–20 kHz - 1200 W 600 W
Max. Single Channel Output Power - Dynamic Headroom, IHF-A 2400 W 1700 W 940 W
Max. Single Channel Output Power - Continuous, 1 kHz 2050 W 1600 W 900 W
Max. Bridged Output Power - THD=1%, 1 kHz - 3800 W 2900 W
Maximum RMS Voltage Swing - THD=1%, 1 kHz 95 V
Voltage Gain - ref. 1 kHz 39/33/32 dB (switchable)
Power Bandwidth - THD=1%, ref. 1 kHz, 1/2 power @ 4Ω 10 Hz–50 kHz
Frequency Response (±1 dB, ref. 1 kHz/1 W) < 10 Hz–30 kHz
Input Sensitivity - at rated power @ 8Ω, 1 kHz 0/+6/+7 dBu (switchable)
Maximum Input Level - ref. 1 kHz +22 dBu (9.75 Vrms)
Input Impedance - balanced 20 kΩ
Crosstalk - ref. 1 kHz, rated output power < -80 dB
THD @ rated power < 0.05%
IMD-SMPTE - 60 Hz, 7 kHz < 0.05%
DIM-30 - 3.15 kHz, 15 kHz < 0.02%
Slew Rate 30 V/μs
Signal to Noise Ratio (A-weighted, 32 dB gain) 109 dB
Output Noise (A-weighted) < -70 dBu
Output Stage Topology Class H Grounded Bridge
Damping Factor - 1 kHz > 400
Power Requirement 100–240V, 50/60 Hz or 100V, 50/60 Hz
Power Consumption 1000 W
Protections Audio Limiters, Hi-Temperature, DC, HF, Short Circuit, Back EMF, Peak Current Limiter, Inrush Current Limiter, Power On Delay, Mains Circuit Breaker Protection, Mains Over/Undervoltage
Cooling Front-to-rear, 5-stage-fans
Ambient Temp. Limits 5° C–40° C (40° F–105° F)
Safety Class I
Dimensions (HxWxD) 8.81 x 48.3 x 51.2 cm (3.5" x 19.0" x 20.2")
Weight 14.2 kg (31.4 lbs)
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or