Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Lutron

Grafik Eye QS - Technical Specifications



Downloads

PDFGrafik Eye QS Brochure (pdf)

PDFGrafik Eye QS Wireless Brochure (pdf)

PDFGrafik Eye QS w/ EcoSystem Brochure (pdf)

PDFGrafik Eye QS Reference List (pdf)

PDFGrafik Eye QS Design Guide (pdf)


Top

GRAFIK Eye QS Control Unit

  • Provides pushbutton recall of four preset lighting scenes, plus Off.
  • Offers optional integrated shade control buttons, which can be added to the unit after installation.
  • Includes master override buttons to temporarily raise and lower all lights.
  • Allows setup of lighting scenes and shade presets using buttons on the control unit.
  • Controls many light source types directly and others using power interfaces.
  • Provides individual control of light sources.
  • Includes built-in infrared receiver.
  • Includes external IR connection.
  • Includes built-in astronomic timeclock.
  • Provides info screen for zone light level percentage, energy savings, zone labeling, accessing additional scenes, programming, and timeclock scheduling.
  • Info screen is language-selectable.
  • Provides lockout options to prevent accidental changes.
  • Includes one occupant sensor input and 24 V power for occupant sensors or other building management systems.
  • Includes communication link for seamless integration of lights, motorized window treatments, and control stations.
  • Backlit buttons with optional engraving make unit easy to find and operate.
  • Available in a variety of colors and finishes to match any décor.
  • Compatible with all Lutron QS system components.
Power
  • 120V, 50/60 Hz
  • Lightning strike protection meets ANSI/IEEE standard 62.41-1980. Can withstand voltage surges of up to 6000 V and current surges of up to 3000 A.
Lighting Sorces/Load Types

Controls the following lighting sources with a smooth, continuous square law dimming curve or on a full conduction non-dim basis:

  • Incandescent
  • Magnetic low-voltage transformer
  • Lutron TuWire® electronic fluorescent dimming ballast
  • Neon and cold cathode
  • Non-dim

Controls the following lighting sources with a smooth, continuous square law dimming curve through separate power interfaces:

  • Electronic low-voltage transformer
  • Lutron Hi-Lume® and Eco-10™ electronic fluorescent dimming ballast.
Key Design Features
  • Meets IEC 801-2. Tested to withstand 15 kV electrostatic discharge without damage or memory loss.
  • Compensates in real time for incoming line voltage variations (no visible flicker with ±2% change in RMS voltage per cycle, and ±2% Hz change in frequency per second).
  • 10-year power failure memory automatically restores lighting to the scene selected prior to power interruption, and stores timeclock and scene programming.
  • Faceplate is hinged top and bottom and stays open at 180° for ease of access.
Standards
  • UL listed
  • CSA
  • NOM

Top

GRAFIK Eye QS Control Unit with EcoSystem®

GRAFIK Eye QS with EcoSystem is the premier energy-saving lighting and shade control. GRAFIK Eye QS features an astronomic timeclock and intuitive lighting presets, which are seamlessly integrated with EcoSystem fluorescent ballasts and LED drivers, and Lutron’s QS components and systems. You can now use the GRAFIK Eye QS to control ballasts and shades without interfaces.

  • Pushbutton recal of four preset lighting scenes, plus Off.
  • Twelve (12) additional scenes accessible through other QS devices, such as seeTouch® QS wallstations.
  • Zones 1, 2, and 3 can control many light source types directly and others using power modules.
  • Optional integrated shade control buttons, which can also be added to the unit after installation.
  • Master override buttons to raise and lower all lights.
  • Allows setup of lighting scenes and shade presets using buttons on the control unit.
  • Built-in infrared (IR) receiver.
  • External IR connection.
  • Built-in astronomic timeclock.
  • Info screen shows zone light level percentage, energy savings, zone labeling, programming, and EcoSystem setup.
  • Lockout option prevents accidental changes.
  • One occupant sensor input and 24 V power for occupant sensor.
  • QS communication link for seamless integration of lights, motorized window treatments, occupant sensors, wallstations, and integration interfaces.
  • Backlit buttons with engraving make unit easy to locate and operate.
  • Available in a variety of colors and finishes.
  • Compatible with all Lutron QS system components.
  • Control up to 6, 8, or 16 EcoSystem zones from internal bus supply.
  • Zones 1, 2, and 3 are integral line voltage dimming zones and can be optionally programmed as EcoSystem zones.
  • Up to 64 EcoSystem or HiLume 3D ballasts can be addressed and grouped to zones.
  • Integral EcoSystem setup and programming replaces the need for a handheld programmer (C-PDA-CLR does not communicate with GRAFIK Eye QS with EcoSystem).
Power
  • 120V, 50/60 Hz
  • Lightning strike protection meets ANSI/IEEE standard 62.41-1980. Can withstand voltage surges of up to 6000V and current surges of up to 3000 A.
Lighting Sources/Load Types
  • EcoSystem, Hi-Lume 3D, and Hi-Lume LED ballasts (available on all zones).

Zones 1, 2, and 3 control the following lighting sources with a smooth, continuous square law dimming curve or on a full conduction non-dim basis:

  • Incandescent
  • Halogen
  • Magnetic low-voltage transformer
  • Lutron Tu-Wire® electronic fluorescent dimming ballast
  • Neon and cold cathode
  • Non-dim (incandescent, magnetic low-voltage, Tu-Wire, or neon/cold cathode)

Zones 1, 2, and 3 control the following lighting sources with a smooth, continuous square law dimming curve through separate Lutron PHPM series power modules:

  • Electronic low-voltage transformer
  • Lutron Hi-Lume®, Eco-10™, and Compact SE electronic fluorescent dimming ballast
Key Design Features
  • Tested to withstand 16 kV electrostatic discharge without damage or memory loss.
  • RTISS™-equipped: Compensates in real time for incoming line voltage variations (no visible flicker with ±2% change in RMS voltage per cycle, and ±2% Hz change in frequency per second).
  • Power failure memory automatically restores lighting to the scene selected prior to power interruption, and stores timeclock and scene programming.
  • Faceplate is hinged top and bottom and stays open at 180° for ease of access.
  • Direct control of 120V and 277V EcoSystem, Hi-Lume 3D, and Hi-Lume LED ballasts (no interface required).
Standards
  • UL listed
  • CSA
  • CEC listed (Title 24)
Load Type Notes (Zones 1, 2 and 3)
  • All electronic low-voltage (ELV) lighting used with an interface must be rated for reverse phase control dimming. Before installing an ELV light source, verify with the manufacturer that their transformer can be dimmed. When dimming, an ELV interface (such as the PHPM-PA-DV-WH) must be used with the control unit.
  • Not all zones must be connected; however, connected zones must have a minimum load of 25 W.
  • Maximum total lighting load for a magnetic low-voltage (MLV) load is 600 W after transformer. Maximum load per MLV zone is 800 VA or 600 W.
  • No zone may be loaded with more than 800 W.

Top

GRAFIK Eye QS Wireless Control Unit

GRAFIK Eye QS Wireless is the premier energy-saving light and shade control. GRAFIK Eye QS includes an astronomic timeclock, intuitive lighting presets, and direct shade control. Now with wireless technology, you can use the GRAFIK Eye QS Wireless to seamlessly integrate with a variety of Lutron wireless products and systems, including Radio Powr Savr™ occupancy and vacancy sensors, Sivoia® QS Wireless shades, Pico™ wireless control, and other GRAFIK Eye QS Wireless control units. Additionally, the GRAFIK Eye QS Wireless is compatible with all Lutron wired QS products and systems.

  • Pushbutton recall of four preset lighting scenes, plus Off.
  • Twelve (12) additional scenes accessible through other QS devices, such as seeTouch QS wallstations.
  • Optional integrated shade control buttons, which can also be added to the unit after installation.
  • Master override buttons to raise and lower all lights.
  • Allows setup of lighting scenes and shade presets using buttons on the control unit.
  • Built-in infrared (IR) receiver.
  • External IR connection.
  • Info screen shows zone light level percentage, energy savings, zone labeling, and programming.
  • Lockout option prevents accidental changes.
  • One occupant sensor input and 24 V power for occupant sensor.
  • QS communication link for seamless integration of lights, motorized window treatments, occupant sensors, wallstations, and integration interfaces.
  • Compatible with all Lutron QS system components.
  • Wireless communication for seamless integration with a variety of Lutron wireless products and systems, including Radio Powr Savr™ occupancy and vacancy sensors, Sivoia® QS wireless shades, Pico™ wireless control units.
  • Backlit buttons with engraving make unit easy to locate and operate.
  • Available in a variety of colors and finishes.
Power

120-127 V, 50/60 Hz

Lighting Sources/Load Types

Controls the following lighting sources with a smooth, continuous square law dimming curve or on a full conduction non-dim basis:

  • Incandescent
  • Halogen
  • Magnetic low-voltage transformer
  • Lutron Tu-Wire electronic fluorescent dimming ballast
  • Neon and cold cathode
  • Non-dim (incandescent, magnetic low-voltage, Tu-Wire, or neon/cold cathode)

Controls the following lighting sources with a smooth, continuous square law dimming curve or on a full conduction non-dim basis through separate Lutron PHPM power interfaces:

  • Electronic low-voltage transformer
  • Lutron Hi-Lume® and Eco-10™ electronic fluorescent dimming ballast
  • Non-dim
Key Design Features
  • RF meets IEC 1000-4-2.
  • Lightning strike protection meets ANSI/IEEE standard 62.41-1980. Can withstand voltage surges of up to 6000 V and current surges of up to 3000 A.
  • Tested to withstand 16 kV electrostatic discharge without damage or memory loss.
  • RTISS™-equipped: Compensates in real time for incoming line voltage variations (no visible flicker with ±2% change in RMS voltage per cycle, and ±2% Hz change in frequency per second).
  • Power failure memory automatically restores lighting to the scene selected prior to power interruption, and stores timeclock and scene programming.
  • Faceplate is hinged at the top and bottom, and stays open at 180° for ease of access.
Standards
  • UL listed
  • CSA
  • NOM
  • CEC listed (Title 24)
  • FCC listed

Top

GRAFIK Eye QS Wireless Control Unit with EcoSystem®

GRAFIK Eye QS Wireless with EcoSystem is the premier energy-saving lighting and shade control. GRAFIK Eye QS features an astronomic timeclock and intuitive lighting presets, which are seamlessly integrated with EcoSystem fluorescent ballasts and LED drivers, and Lutron’s QS components and systems. Now with wireless technology and an integral EcoSystem bus supply, you can use the GRAFIK Eye QS Wireless with EcoSystem to control ballasts and shades without interfaces, and integrate with a variety of Lutron wireless products and systems, including Radio Powr Savr™ occupancy and vacancy sensors, Sivoia QS wireless shades, Pico™ wireless control, and other GRAFIK Eye QS wireless control units. Additionally, the GRAFIK Eye QS wireless is compatible with all Lutron wired QS products and systems.

  • Pushbutton recall of four preset lighting scenes, plus Off.
  • Twelve (12) additional scenes accessible through other QS devices, such as seeTouch QS wallstations.
  • Zones 1, 2, and 3 can control many light source types directly and others using power modules.
  • Optional integrated shade control buttons, which can also be added to the unit after installation.
  • Master override buttons to raise and lower all lights.
  • Allows setup of lighting scenes and shade presets using buttons on the control unit.
  • Built-in infrared (IR) receiver.
  • External IR connection.
  • Built-in astronomic timeclock.
  • Info screen shows zone light level percentage, energy savings, zone labeling, programming, and EcoSystem setup.
  • Lockout option prevents accidental changes.
  • One occupant sensor input and 24 V power for occupant sensor.
  • QS communication link for seamless integration of lights, motorized window treatments, occupant sensors, wallstations, and integration interfaces.
  • Compatible with all Lutron QS system components.
  • Wireless communication for seamless integration with a variety of Lutron wireless products and systems, including Radio Powr Savr™ occupancy and vacancy sensors, Sivoia QS wireless shades, Pico™ wireless controls, and other GRAFIK Eye QS Wireless control units.
  • Control up to 6, 8, or 16 EcoSystem zones from internal bus supply.
  • Zones 1, 2, and 3 are integral line voltage dimming zones and can be optionally programmed as EcoSystem zones.
  • Up to 64 EcoSystem or Hi-Lume 3D ballasts can be addressed and grouped to zones.
  • Integral EcoSystem setup and programming replaces the need for a handheld programmer (C-PDA-CLR does not communicate with GRAFIK Eye QS with EcoSystem).
  • Backlit buttons with engraving make unit easy to locate and operate.
  • Available in a variety of colors and finishes.
Power

120 V, 50/60 Hz

Lighting Sources/Load Types
  • EcoSystem, Hi-Lume 3D, and Hi-Lume LED ballasts (available in all zones).

Zones 1, 2, and 3 control the following lighting sources with a smooth, continuous square law dimming curve or on a full conduction non-dim basis:

  • Incandescent
  • Halogen
  • Magentic low-voltage transformer
  • Lutron Tu-Wire® electronic fluorescent dimming ballast
  • Neon and cold cathode
  • Non-dim (incandescent, magnetic low-voltage, Tu-Wire, or neon/cold cathode)

Zones 1, 2, and 3 control the following lighting sources with a smooth, continuous square law dimming curve or on a full conduction non-dim basis through separate Lutron PHPM series power modules:

  • Electronic low-voltage transformer
  • Lutron Hi-Lume®, Eco-10™, and Compact SE electronic fluorescent dimming ballast
  • Non-dim
Key Design Features
  • RF meets IEC 1000-4-2.
  • Lightning strike protection meets ANSI/IEEE standard 62.41-1980. Can withstand voltage surges of up to 6000 V and current surges of up to 3000 A.
  • Tested to withstand 16 kV electrostatic discharge without damage or memory loss.
  • RTISS™-equipped: Compensates in real time for incoming line voltage variations (no visible flicker with ±2% change in RMS voltage per cycle, and ±2% Hz change in frequency per second.)
  • Power failure memory automatically restores lighting to the scene selected prior to power interruption, and stores timeclock and scene programming.
  • Faceplate is hinged at the top and bottom, and stays open at 180° for ease of access.
  • Direct control of 120 V and 277 V EcoSystem, Hi-Lume 3D, and Hi-Lume LED ballasts (no interface required).
Standards
  • UL listed
  • CSA
  • NOM
  • CEC listed (Title 24)
  • FCC listed

Top

General Specifications

Environment

32-104°F (0-40°C). Relative humidity less than 90% non-condensing.

Scene and Shade Buttons
  • Large, rounded buttons are easy to use.
  • Backlit buttons with optional engraving make it easy to find and to operate the control unit in low light conditions (backlight can be disabled).
  • Optional button engraving is angled up to the eye for easy reading.
  • Predefined label stickers are included for field labeling.
Preset Light and Shade Control
  • 4 preset lighting scenes, plus Off, are accessible from the front of the control unit.
  • 12 additional scenes are stored in the control unit and are accessible from seeTouch QS wallstations and QS interfaces.
  • Light levels fade smoothly between scenes. Fade time can be set differently for each scene: 0 to 59 seconds, or 1 to 60 minutes. Maximum fade time from Off is 3 seconds.
  • Up to 3 columns of shade control.
  • Open, preset, close, and raise/lower shade buttons. Each shade column can be programmed to operate one shade or a group of shades.
Zone Control
  • Each zone has a dedicated raise and lower button to adjust the zone.
  • Each zone has a dedicated 7 LED bar graph for level status. Percentage of light level and energy saved is displayed on the info screen.
  • All zone information has blue backlit LEDs. Backlight turns off when idle for 30 seconds.
Info Screen
  • OLED (organic LED) screen is viewable from all angles.
  • Screen turns off when idle for 30 seconds.
  • Programmable zone labels.
  • Programmable scene labels.
  • Status of real-time zone percentage and energy savings.
  • Programmable timeclock schedules.
  • Programmable shade labels.
Astronomic Timeclock
  • Integral to all units.
  • 7 daily schedules available.
  • One available holiday schedule is programmable by date up to one year in advance.
  • 25 events per day maximum.
  • Astronomic times are programmable by integral city database or by entering latitude and longitude. Times automatically adjust throughout the year based on location.
  • Automatically adjusts for Daylight Saving Time (DST), adjusted for the new dates; DST is programmable.
  • Afterhours feature allows occupants to temporarily override timeclock events.
System Communications and Capacities
  • Low-voltage type Class 2 (PELV) wiring connects control units, wallstations, motorized shades, and control interfaces.
  • A QS system can have up to 100 devices and 100 zones.
  • A QS system can have up to 30 wireless devices. (wireless units only)
  • Class 1/Class 2 wiring connects ballast to control unit.
Infrared
  • Infrared (IR) receiver allows infrared transmitters to select 8 scenes, raise/lower lighting zones, or raise/lower shades.
  • Transmitter buttons imitate buttons on faceplate.
  • 50 ft (15 m) line of sight range.
  • Terminal block infrared input for direct contact with external IR connection.
  • IR can be disabled via programming.
  • Works with Lutron GRX-IT and GRX-8IT infrared remote controllers.
Accessory Controls: seeTouch QS Wallstations
  • Each GRAFIK Eye QS can power up to 3 wired seeTouch QS controls.
  • Wired seeTouch QS keypads provide the following features:
    • Access to one or more of the 16 scenes on the GRAFIK Eye QS Wireless
    • Zone toggle, partitioning, sequencing, fine tune, panic mode, and timeclock enable/disable
    • Contact closure inputs
    • Various other functions that are available on specific wallstation configurations.
Accessory Controls: Pico® Wireless Control - (Wireless units only)
  • The Pico Wireless Control is battery powered. It can control GRAFIK Eye QS wireless control units within a 30-foot range. It provides the following features:
    • Control of one or more zones on the GRAFIK Eye QS Wireless: turns zone(s) on or off, raise/lowers zone(s), and goes to user-programmable preset level.
    • Scene control: the Pico can access scene 1, scene 16, and Off on the GRAFIK Eye QS, and can raise and lower lighting levels.
Occupant Sensor(s)
  • Each GRAFIK Eye QS can be programmed to respond to up to four (4) occupancy/vacancy sensors.
  • Occupant sensors may include:
    • Contact closure sensor wired to CCI input on back of GRAFIK Eye QS.
    • Contact closure sensor(s) wired to EcoSystem ballasts or interfaces (eco units only).
    • Up to 3 wireless Radio Powr Savr™ occupancy or vacancy sensors (wireless units only).
  • Occupant sensors act in a logical OR fashion to activate scenes on the GRAFIK Eye QS:
    • If any associated sensor detects occupancy, then the GRAFIK Eye QS will go to the designated occupied scene.
    • If all associated sensors detect vacancy, then the GRAFIK Eye QS will go to the designated unoccupied scene.
    • If any associated sensor detects occupancy and the GRAFIK Eye QS is in any scene other than the unoccupied scene, the GRAFIK Eye QS will not change scenes (prevents unwanted scene changes when the space is occupied).
Contact Closure Input (CCI) with Power Supply Output
  • Each GRAFIK Eye QS has one contact closure input (Terminal A).
    • The attached device must provide a dry contact closure or solid-state output.
    • Input is miswire-protected up to 36 V.
  • Each GRAFIK Eye QS can supply 50 mA maximum at 24 V (Terminal B).
    • Useful for powering occupant sensors.
    • An auxiliary power supply must be used if the device requires more than 50 mA.
Daylight Sensor(s) - (EcoSystem units only)
  • Each GRAFIK Eye QS can be programmed to respond to up to four (4) EcoSystem daylight sensors.
  • Daylight sensors can be mapped to control groups of EcoSystem-controlled fixtures independent of the zones on the GRAFIK Eye QS (useful for creating daylight rows).
  • Daylight sensors can be mapped to control zones 1, 2, and 3 if the zones are set to a load type other than EcoSystem.

Top

Faceplate Color and Finish Options

GRAFIK Eye QS is available in a variety of color and finish options for endless combinations to accent any décor.

  • Over 40 color and finish options
  • Optional black translucent top
  • 12 button color options
Solid Color (same top & bottom)Translucent Top
SuffixFaceplate Top & BottomStripeButtonsSuffixFaceplate & StripeButtons
Architectural Matte
WHwhitegraywhiteTWHwhitewhite
BEbeigeivorybeigeTBEbeigebeige
IVivorybeigeivoryTIVivoryivory
GRgrayblackgrayTGRgraygray
BRbrownblackbrownTBRbrownbrown
BLblackgrayblackTBLblackblack
ALalmondlight almondalmondTALalmondalmond
LAlight almondalmondlight almondTLAlight almondlight almond
Satin Matte
MNmidnightgrayblackTMNmidnightblack
TPtaupegraytaupeTTPtaupetaupe
SWsnowgraysnowTSWsnowsnow
ESeggshellbeigeeggshellTESeggshelleggshell
BIbiscuiteggshellbiscuitTBIbiscuitbiscuit
LSlimestonegraygrayTLSlimestonegray
STstonegraygrayTSTstonegray
DSdesert stonetaupetaupeTDSdesert stonetaupe
TCterracottataupetaupeTTCterracottataupe
BGbluestonegraygrayTBGbluestonegray
HThottaupetaupeTHThottaupe
MRmerlottaupetaupeTMRmerlottaupe
SIsiennabrownbrownTSIsiennabrown
GBgreenbriargraygrayTGBgreenbriargray
SGsea glassgraygrayTSGsea glassgray
MSmochastonetaupetaupeTMSmochastonetaupe
GSgoldstoneivoryivoryTGSgoldstoneivory
PDpalladiumgraygrayTPDpalladiumgray
PLplumtaupetaupeTPLplumtaupe
TQturquoisegraygrayTTQturquoisegray
Architectural Metal
BBbright brassblackblackTBBbright brassblack
BCbright chromeblackblackTBCbright chromeblack
BNbright nickleblackblackTBNbright nickleblack
SBsatin brassblackblackTSBsatin brassblack
SCsatin chromeblackblackTSCsatin chromeblack
SNsatin nickleblackblackTSNsatin nickleblack
QBantique brassblackblackTQBantique brassblack
QZantique bronzeblackblackTQZantique bronzeblack
Anodized Metal
CLAclearblackblackTCLAclearblack
BLAblackblackblackTBLAblackblack
BRAbrassblackblackTBRAbrassblack

The color and finish of the faceplate, comprised of a top and bottom, is indicated by the model number suffix. The top may be either the same as the bottom or translucent. Each suffix has a standard button and stripe color. Button and stripe kits provide alternate color combinations.

Purchasing
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or