SSE 12M
 SSE 12M - Call for pricing - 12-inch 500 watt Monitor
Downloads
The SSE 12M is a new low-profile monitor enclosure featuring high power ratings with custom components, a sleek look and a unique, snap-in metal grille.
The SSE 12M is a full-range, two-way system featuring the highly acclaimed Peavey 14XT™ titanium compression driver
with the diverse Sound Guard™ IV tweeter protection network and Peavey Scorpion® Pro 1200+ 12" woofer with 2.5" (64 mm) voice coil for a smooth response.
The SSE 12M is rated at 500 Watts program and 1000 Watts peak.
This lightweight speaker system may be placed on stage at angles of either 30° or 45° and is ideal for smaller venues where stage space is at a premium.
Connections are made using a four-pin Neutrik® Speakon® or a paralleled two-position terminal block for additional cabinets.
The SSE 12M is available in black, off-white and natural finishes.
Features
- Two-way monitor enclosure
- Peavey Scorpion® Pro 1200+ 12" woofer with 2.5" (64mm) voice coil
- Peavey 14XT™ titanium diaphragm compression driver
- Sound Guard™ IV tweeter protection network
- 12 mm birch plywood construction
- Available in three finishes, black, off-white or natural
Architectural and Engineering Specifications
The loudspeaker system shall have an operating bandwidth of 79 Hz to 17 kHz.
The nominal output level shall be 98 dB when measured at a distance of one meter with an input of one watt.
The nominal impedance shall be 8 ohms.
The maximum program power handling shall be 500 watts, with a peak power input of at least 1000 watts and a minimum amplifier headroom of 3 dB.
The nominal radiation geometry shall be 90 degrees in the horizontal plane and 40 degrees in the vertical plane.
The outside dimensions shall be 15.22 inches high by 24.5 inches wide by 16.96 inches deep.
The weight shall be 35 pounds. The loudspeaker system shall be a model SSE 12M.
| Specifications |
| Frequency Response (±3dB) | 79 Hz–17 kHz | Power Handling | 250 W cont. / 500 W prog. / 1000 W peak |
| Frequency Range (-10dB) | 60 Hz–17 kHz | Box Tuning Frequency | 74 Hz |
| Sensitivity 1 W/1 m | 98 dB | Crossover Frequency | 2800 kHz |
| Max SPL/ 1m (calc) | 128 dB | Nominal Impedance | 8 Ω |
| Coverage (HxV) | 90° x 40° | Minimum Impedance | 5.4 Ω |
| Enclosure Material | Birch plywood w/ textured acrylic finish and cloth covered metal grille | Input Connections | (1) 4-pin Neutrik Speakon, (1) two-position terminal strip |
| Transducers (LF/HF) | Scorpion Pro 1200+ / 14XT | |
| Dimensions (HxWxD) | 38.7 x 62.2 x 43.1 cm
(15.2" x 24.5" x 17.0") | Weight | 15.88 kg (35 lbs) |
|
SSE 12M Spec Sheet (pdf)