Loyola Enterprises

A veteran and minority owned SDB Certified Business.


Electro-Voice P 3000

757.498.6118 Ext - 109P 3000 - Call for pricing - Power Amplifier


PDFP 3000 Specifications (pdf)

PDFP 3000 Manual (pdf)

The Precision Series (P-Series) is EV’s top line of linear power amplifiers. Their extreme reliability, high-level sound, and durability make them the professional’s choice among rental companies and musicians. For flown applications in touring market, rear-rack mount kits are available to help stabilize the rack frame and ensure safe transportation.

The Electro-Voice P3000 Linear Precision™ amplifier is a very-high-quality power amplifier designed to elicit maximum performance from any speaker system. Its ultralow distortion and powerful amplifiers ensure that program material will be amplified very accurately.

Each channel of the P3000 delivers more than 750 watts continuous average power into 8 ohms, 1,200 watts into 4 ohms and 1,500 watts into 2 ohms over the full audio frequency range. In the bridge mode, the amplifier can deliver more than 2,800 watts into 8 ohms and 3,600 watts into 4 ohms at less than 1% THD. The power supply, with its large toroidal transformer, gives the amplifier impressive headroom and current output.

The P3000 contains 48 high-power output devices with 12,000 watts of dissipation capability. These devices are protected from overheating by four, three-speed, temperature-sensitive fans. The fans are quiet enough to permit use of the P3000 in noise-sensitive applications such as recording studios and houses of worship.

The output devices are mounted to a massive, extruded-aluminum heat sink that is engineered to minimize thermal gradients and allow the amplifier to operate safely into low-impedance loads. The output devices have a maximum junction temperature of 200°C (392°F), so high operational temperatures present no problems. The output devices are mounted directly to the heat sink without mica insulators to ensure better dissipation of heat.

Many electronic circuit innovations exist in the P3000. Among the most novel of these circuits is the Mirrored Frontend Power Supply Bridge™. This design ensures complete symmetry for each bridged amplifier and both signal polarities, and eliminates asymmetrical rise and fall times. The Dual Differential Discrete Topology™ is part of the front end of the amplifier and uses discrete electrical components instead of integrated circuits to help the P3000 achieve its phenomenally low distortion.

The P3000 has sophisticated protection circuits that guard it and the load from problems. Protection circuits guard against overload, overtemperature, shorted outputs, radio-frequency interference and dc faults. The output devices are protected against damage from reverse feeding of electrical energy (back EMF) and are switched on via relays to avoid transients which could damage speakers.

The P3000 has built-in limiters to protect speakers from the deleterious effects of amplifier clipping. The limiter’s action is governed by very sophisticated input/output comparators which have acoustically optimized time constants to preserve the integrity of the source. The limiter’s time constants are switchable fast/slow, so the limiter may be matched to the application for which the amplifier is being used.

The P3000 has built-in switchable high- and low-cut filters. These filters attenuate infrasonic and ultrahigh-frequency signals, preventing them from being amplified; this allows more effective use of the amplifier’s power and adds a measure of load protection. These filters are switchable on/off for use in applications utilizing front-end units (like crossovers or equalizers) which have these filters built-in.

A multifunction display keeps the user informed of the operating status of the amplifier. Separate LED displays for each channel show power on, input signal, output signal, limiter on and protection active.

The P3000 has electronically balanced XLR-type input and output connectors that allow easy, problem-free connections and signal routing. The P3000 has an input routing switch that allows selection of either normal dual-channel operation, or parallel mono operation, which routes an input to both channels but still allows for independent level control. The P3000 also has a constant-gain option which allows the voltage gain to be fixed. This permits different amplifiers to be used in fixed installations without rebalancing, end ensures headroom is not wasted.

The P3000’s professional Neutrik Speakon® output connectors provide a sturdy, reliable connection and allow use of heavy wire for loss-free signal transmission. There are separate output connectors for channels A and B, and for the bridge mode. The bridge-mode connector is sealed with a plastic cover to prevent connection errors.

To prevent ground loops from occurring, the P3000 is equipped with a ground-lift switch. When the amplifier is operated in a rack with units of different ground potential, the switch may be adjusted to eliminate hum.

Calibrated, detented potentiometers on the front panel regulate the gain of the P3000. The panel nomenclature shows the amount of attenuation accurately.

The P3000 also has a constant-gain option which, with input level controls full clockwise, provides a 26-dB voltage gain that is identical to that of all Electro-Voice Precision Series™ amplifiers in the constant-gain option, regardless of power rating. This makes it possible to exchange amplifiers of different power ratings without upsetting delivered sound pressure levels or spectral balances.

The Electro-Voice P3000 is the choice for serious, professional amplification applications which require optimum sound quality, speaker protection, and the highest level of construction quality and long-term reliability.


  • 1,800 Watts per channel at 2 Ohms
  • Three-Rack-Space Chassis
  • Neutrik Speakon® Output Connectors Allow Use of Heavy-Gauge Speaker Wire for Low-Loss Connections
  • Extremely Low Dynamic Distortion Ensures Excellent Sound Quality
  • Three-Year Parts-and-Labor Warranty

Architectural and Engineering Specifications

The power amplifier shall be a dual-channel model of solid-state design employing high-power output devices in a true-complementary-symmetry output circuit. It shall be capable of operating from a 120/200/220/240-V, 50/60-Hz AC line. The power amplifier shall contain a modern limiter circuit with switchable time constants to protect the load from damage by amplifier clipping.

The amplifier shall contain sensing circuitry to provide protection for the output transistors against overtemperature, excessive output voltage, radio-frequency interference, shorted loads, excessive phase shift and back-EMF current. The load shall be similarly protected against infrasonic signals, start-up/shutdown transients, low AC line voltage and DC.

Rear-mounted panel controls shall include an input routing switch for selecting dual/stereo or parallel mono operation, a switch for turning the infrasonic and ultrasonic filters on or off, a switch for selecting dual/stereo or bridged operation and a switch for selecting fast or slow speed for built-in limiters. Input connections for each channel shall include a 3-pin female XLR-type connector wired in parallel with a male 3-pin XLR output connector for signal routing. Output connectors shall be Neutrik Speakon® NL4MPs for channels A and B, and for bridged operation.

Front-panel indicators shall include power on, input present, output, limit and protect LEDs for each channel. Front-panel controls shall include a power switch and level controls that shall be calibrated, detented potentiometers and have accurate markings. The amplifier shall have a constant-gain option that, with input level controls full clockwise, provides a 26-dB voltage gain that is identical to that of all Electro-Voice Precision Series™ power amplifiers.

The power amplifier shall meet the following performance specifications: maximum input voltage, 7.75 V rms; rated output power from 20 Hz to 20 kHz at less than 0.1% THD, each channel, 750 watts into 8 ohms, 1,200 watts into 4 ohms, 1,500 watts into 2 ohms, 2,400 watts bridged into 8 ohms and 3,000 watts bridged into 4 ohms; hum and noise, at least 100 dB (A-weighted) below rated output power; frequency response, <10 Hz to 30 kHz (+0/-3 dB) at any output power up to rated output power; damping factor, >300 at any frequency up to 1 kHz in any mode with an 8-ohm load; THD (total harmonic distortion), <0.05% at 1 kHz at rated power; transient intermodulation distortion (DIN 30 or DIN 100), <0.01%; crosstalk, <70 dB below rated output power. Dimensions shall be 132.5 mm (5.25") high x 483 mm (19.0") wide x 426 mm (16.8") deep. Net weight shall be 32.7 kg (72 lb). Color shall be gray.

The power amplifier shall be the Electro-Voice P3000.

2 Ω4 Ω8 Ω
Continuous Rated Output Power - THD=1%, 1 kHz, Dual Channel 1800 W 1400 W 850 W
Continuous Rated Output Power - THD <0.1%, 20 Hz–20 kHz 1500 W 1200 W 750 W
Max. Bridged Output Power - THD=1%, 1 kHz - 3600 W 2800 W
Voltage Gain - ref. 1 kHz 26 dB
Power Bandwidth (+0/-1dB, ref. 1 kHz) 10 Hz–30 kHz
Frequency Response (+0/-3dB, ref. 1 kHz/1 W) < 10 Hz–30 kHz
Input Sensitivity - 1 kHz, Dual Mode for 800W into 4Ω 0 dBu (775 mV)
Maximum Input Level - ref. 1 kHz +20 dBu (7.75 V)
Input Impedance - balanced 20 kΩ
Crosstalk - ref. 1 kHz, rated output power < -70 dB
Phase Response @ rated power ±22.5°
THD + Noise @ rated power, 1 kHz < 0.05%
IMD-SMPTE - 60 Hz, 7 kHz < 0.01%
DIM-30 - 3.15 kHz, 15 kHz < 0.01%
Rise Time - 10% to 90% @ rated power < 2.5 μs
Slew Rate > 40 V/μs
Signal to Noise Ratio (A-weighted) > 105 dB
Damping Factor - 1 kHz > 300
Power Requirement 120V, 200V, 220V, 240V AC; 50–60 Hz
Power Consumption 1200 VA
Amplifier Protection Excessive output voltage; shorted loads; excessive phase shift; rf interference; overtemperature; excessive back EMF; In-rush current limiter
Load Protection Start-up/shutdown transients; dc fault; infrasonic signals; low ac line voltage; nonlinear signal limiter
Output Topology True complementary symmetry with ungrounded collectors
Connections (input) (2) 3-pin female XLR in parallel with (2) 3-pin male XLR output
Connections (output) (3) Neutrik Speakon® NL4MP
Power Cord 12-gauge, 3-wire, permanently attached
Dimensions (HxWxD) 13.3 x 48.3 x 42.6 cm (5.25" x 19.0" x 16.8")
Weight 28 kg (61.7 lbs)
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or