Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Sanctuary Series

SSE 15

757.498.6118 Ext - 109SSE 15 - Call for pricing - 15-inch 500 watt Loudspeaker


PDFSSE 15 Spec Sheet (pdf)

The SSE 15 is designed for professional permanent installations where cabinets must be flown in order to cover as much area as possible. The SSE 15 is designed for arraying on stage, churches auditoriums or theme parks. The horn has a coverage pattern of 90° in the horizontal axis and 40° in the vertical axis. The highs are generated using the highly acclaimed Peavey 14XT™ titanium compression driver.

The Sound Guard™ IV tweeter protection network is built in for driver protection. The low end is produced using the Peavey Scorpion® Pro 1500+ 15" woofer with 2.5" (64 mm) voice coil. Connections are made using a four-pin Neutrik® Speakon® or a paralleled two-position terminal block for additional cabinets.

The SSE 15 incorporates flying points on the top and bottom for the utilization of the Peavey VersaMount™ 70 mounting bracket. The SSE 15 is constructed with a special grade of high density 13 mm birch plywood and covered with durable acrylic polyurethane. This finish makes the enclosure presentable in any application. The SSE 15 is available in black, off-white or a natural wood finish for staining or painting. The SSE 15 is engineered for public address and a wide range of musical applications.


  • Two-way sound reinforcement enclosure
  • Designed for permanent install
  • Full-range, wide-band production from 74 Hz to 17 kHz
  • Available in three finishes: black, off-white or natural
  • Peavey Scorpion® Pro 1500+ 15" woofer with 2.5" (64 mm) voice coil
  • Peavey 14XT™ titanium diaphragm compression driver
  • Sound Guard™ IV tweeter protection network
  • Seven flying points (six 3/8" for suspension and one ¼" for angle adjustment)
  • Mounting point for VersaMount™ 70 bracket
  • 13 mm birch plywood construction

Architectural and Engineering Specifications

The loudspeaker system shall have an operating bandwidth of 74 Hz to 17 kHz. The nominal output level shall be 98 dB when measured at a distance of one meter with an input of one watt. The nominal impedance shall be 8 ohms. The maximum program power handling shall be 500 watts with a peak power input of at least 1000 watts and a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 90 degrees in the horizontal plane and 40 degrees in the vertical plane. The outside dimensions shall be 27 inches high by 18 inches wide by 17.75 inches deep. The weight shall be 46 pounds. The loudspeaker system shall be a model SSE 15.

Frequency Response (±3dB) 74 Hz–17 kHz Power Handling 250 W cont. / 500 W prog. / 1000 W peak
Frequency Range (-10dB) 54 Hz–17 kHz Box Tuning Frequency 74 Hz
Sensitivity 1 W/1 m 98 dB Crossover Frequency 2800 kHz
Max SPL/ 1m (calc) 128 dB Nominal Impedance 8 Ω
Coverage (HxV) 90° x 40° Minimum Impedance 5.4 Ω
Transducers (LF/HF) Scorpion Pro 1500+ / 14XT Input Connections (1) 4-pin Neutrik Speakon, (1) two-position terminal strip
Enclosure Material Birch plywood w/ textured acrylic finish and cloth covered metal grille Mounting Provisions (6) 3/8"-16 threaded mounting points, (1) ¼"-20 threaded mounting point on back-bottom, (4) ¼"-20 threaded mounting points on bottom for Versamount
Dimensions (HxWxD) 68.6 x 46.7 x 45.1 cm
(27.0" x 18.0" x 17.8")
Weight 20.9 kg (46 lbs)
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or