Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Sanctuary Series

SSE 12

757.498.6118 Ext - 109SSE 12 - Call for pricing - 12-inch 500 watt Loudspeaker


PDFSSE 12 Spec Sheet (pdf)

The SSE is a new enclosure series featuring high power ratings with custom components, a sleek look and a unique, snap-in metal grille. The SSE 12 is a two-way system featuring the highly acclaimed Peavey 14XT™ titanium compression driver with the diverse Sound Guard™ IV tweeter protection network and Peavey Scorpion® Pro 1200+ 12" woofer with 2.5" (64 mm) voice coil for smooth response.

The SSE 12 is rated at 500 Watts program and 1,000 Watts peak. This lightweight speaker system is ideal for smaller venues where space is at a premium. Connections are made using a four-pin Neutrik® Speakon® or a paralleled two-position terminal block for additional cabinets.

The SSE 12 incorporates flying points on the top of the unit and mounting points on the bottom for utilizing the Peavey VersaMount™ 70 mounting bracket. The SSE Series is available in black, off-white and natural finishes.


  • Two-way sound reinforcement enclosure
  • Designed for permanent install
  • Available in three finishes: black, off-white or natural
  • Peavey Scorpion® Pro 1200+ 12" woofer with 2.5" (64 mm) voice coil
  • Peavey 14XT™ titanium diaphragm compression driver
  • Sound Guard™ IV tweeter protection network
  • Seven flying points (six 3/8" for suspension and one ¼" for angle adjustment)
  • Mounting point for VersaMount™ 70 bracket
  • 13 mm birch plywood construction

Architectural and Engineering Specifications

The loudspeaker system shall have an operating bandwidth of 79 Hz to 17 kHz. The nominal output level shall be 98 dB when measured at a distance of one meter with an input of one watt. The nominal impedance shall be 8 ohms. The maximum program power handling shall be 500 watts with a peak power input of at least 1000 watts and a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 90 degrees in the horizontal plane and 40 degrees in the vertical plane. The outside dimensions shall be 24.5 inches high by 17.43 inches wide by 13.20 inches deep. The weight shall be 40 pounds. The loudspeaker system shall be a model SSE 12.

Frequency Response (±3dB) 79 Hz–17 kHz Power Handling 250 W cont. / 500 W prog. / 1000 W peak
Frequency Range (-10dB) 60 Hz–17 kHz Box Tuning Frequency 74 Hz
Sensitivity 1 W/1 m 98 dB Crossover Frequency 2800 Hz
Max SPL/ 1m (calc) 128 dB Nominal Impedance 8 Ω
Coverage (HxV) 90° x 40° Minimum Impedance 5.1 Ω
Transducers (LF/HF) Scorpion Pro 1200+ / 14XT Input Connections (1) 4-pin Neutrik Speakon, (1) one-position terminal strip
Enclosure Material Birch plywood w/ textured acrylic finish and cloth covered metal grille Mounting Provisions (6) 3/8"-16 threaded mounting points, (1) ¼"-20 threaded mounting point on back-bottom, (4) ¼"-20 threaded mounting points on bottom for Versamount
Dimensions (HxWxD) 62.2 x 44.3 x 33.5 cm
(24.5" x 17.4" x 13.2")
Weight 18.1 kg (40 lbs)
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or