SSE 10M
 SSE 10M - Call for pricing - 10-inch 400 watt Monitor
Downloads
The SSE 10M is a new low-profile monitor enclosure featuring high power ratings with custom components, a sleek look and a unique, snap-in metal grille.
The SSE 10M is a full-range, two-way system featuring the highly acclaimed Peavey 14XT™ titanium compression driver
with the diverse Sound Guard™ IV tweeter protection network and a maximum-performance 10" woofer for a smooth response.
The SSE 10M is rated at 400 Watts program and 800 Watts peak.
This lightweight speaker system may be placed on stage at angles of either 30° or 45° and is ideal for smaller venues where stage space is at a premium.
Connections are made using a four-pin Neutrik® Speakon® or a paralleled two-position terminal block for additional cabinets.
The SSE 10M is available in black, off-white and natural finishes.
Features
- Two-way monitor enclosure Peavey 14XT™ titanium compression driver
- Sound Guard™ IV tweeter protection network
- 400 Watts program/800 Watts peak power handling
- 12 mm birch plywood construction
- Available in three finishes: black, off-white or natural
Architectural and Engineering Specifications
The loudspeaker system shall have an operating bandwidth of 80 Hz to 17 kHz.
The nominal output level shall be 95 dB when measured at a distance of one meter with an input of one watt.
The nominal impedance shall be 8 ohms.
The maximum program power handling shall be 400 watts, with a peak power input of at least 800 watts and a minimum amplifier headroom of 3 dB.
The nominal radiation geometry shall be 90 degrees in the horizontal plane and 60 degrees in the vertical plane.
The outside dimensions shall be 14.56 inches high by 19.63 inches wide by 15.95 inches deep.
The weight shall be 29 pounds. The loudspeaker system shall be a model SSE 10M.
| Specifications |
| Frequency Response (±3dB) | 80 Hz–17 kHz | Power Handling | 200 W cont. / 400 W prog. / 800 W peak |
| Frequency Range (-10dB) | 60 Hz–17 kHz | Box Tuning Frequency | 78 Hz |
| Sensitivity 1 W/1 m | 95 dB | Crossover Frequency | 2800 kHz |
| Max SPL/ 1m (calc) | 124 dB | Nominal Impedance | 8 Ω |
| Coverage (HxV) | 90° x 60° | Minimum Impedance | 5.4 Ω |
| Enclosure Material | Birch plywood w/ textured acrylic finish and cloth covered metal grille | Input Connections | (1) 4-pin Neutrik Speakon, (1) two-position terminal strip |
| Transducers (LF/HF) | 10" premium / 14XT | |
| Dimensions (HxWxD) | 37.0 x 49.8 x 40.5 cm
(14.6" x 19.6" x 15.9") | Weight | 13.2 kg (29 lbs) |
|
SSE 10M Spec Sheet (pdf)