View Larger Image

Grafik Eye - Technical Specifications

• GRAFIK Eye 3000 Series
• GRAFIK Eye 4000 Series
• GRAFIK Eye 4000 Series Slider
• GRAFIK Eye Color Options

Downloads

Grafik Eye Guide (pdf)

Grafik Eye 3000 Series Selection Guide (pdf)

GRAFIK Eye 3000 Series Control Unit

• Provides pushbutton recall of four preset lighting scenes, plus Off.
• Allows setup of lighting scenes using buttons on the Control Unit.
• Controls many light source types directly, and others using power interfaces.
• Provides lockout options to prevent accidental changes.
• Includes built-in infrared receiver for operation with an optional remote control.

• Accept 120V, 220-240V (non-CE), 230V (CE) and 100V input power.
• Control two to six zones of lighting.

GRX-3100 Control Units provide setup using buttons on the Control Unit.

GRX-3500 Control Units provide optional setup using a PC, including setting lighting levels in 1% increments.

Specifications

• 120V, 220-240V (non-CE), 230V (CE) or 100V, 50/60Hz.
• Lightning Strike Protection: Meets ANSI/IEEE standard 62.41-1980. Can withstand voltage surges of up to 6000V and current surges of up to 3000A.

Controls the following lighting sources with a smooth, continuous Square Law dimming curve or on a full conduction non-dim basis:

• Incandescent, Tungsten, Magnetic Low Voltage Transformer
• Lutron Tu-Wire® Electronic Fluorescent Dimming Ballast
• Neon and Cold Cathode

Controls the following lighting sources with a smooth continuous Square Law dimming curve through separate power interfaces:

• Electronic Low Voltage Transformer
• Lutron Electronic Fluorescent Dimming Ballast

• 4 preset lighting scenes and off are accessible from the Control Unit front panel.
• 12 additional scenes are stored in the Control Unit. These scenes are accessible via Wallstations and/or Control Interfaces.
• Light levels fade smoothly between scenes. Fade time can be set differently for each scene, between 0-59 sec. or 1-60 min. Fade time from Off is capped at 5 sec.

• Meets IEC 801-2. Tested to withstand 15kV electrostatic discharge without damage or memory loss.
• Compensates in real time for incoming line voltage variations: No visible flicker with ±2% change in RMS voltage/cycle and ±2% Hz change in frequency/second.
• 10-year power failure memory automatically restores lighting to levels prior to power interruption.
• Faceplate snaps on with no visible means of attachment.

• Low-voltage type Class 2 (PELV) wiring connects Control Units, Wallstations, and Control Interfaces.
• Up to 8 Control Units may be linked to control up to 48 zones.
• Up to 16 total Wallstations and Control Interfaces may be added for a total of 24 control points.

• 32-104°F (0-40°C). Relative humidity less than 90% non-condensing.

Model Numbers

GRAFIK Eye 4000 Series Control Unit

• Provides pushbutton recall of four preset lighting scenes, plus Off.
• Allows setup of lighting scenes using buttons on the Control Unit.
• Controls virtually any light source via dimming and switching panels.
• Provides lockout options to prevent accidental changes.
• Includes built-in infrared receiver for operation with an optional remote control.

• Control 2 to 24 zones lighting.

• GRAFIK Eye Wallstations
• GP and LP Dimming Panels
• XP Softswitch™ Panels

GRX-4100 Control Units Provide setup using buttons on the Control Unit.

GRX-4500 Control Units Provide optional setup using a PC, including setting lighting levels in 1% increments.

Specifications

• Low-voltage type Class 2 (PELV) Operating voltage: 24V Direct Current.

Controls lighting sources with a smooth, continuous Square Law dimming curve or on a full conduction non-dim basis via GP and LP Dimming Panels and XP Softswitch™ Panels.

• 4 preset lighting scenes and off are accessible from the Control Unit front panel.
• 12 additional scenes are stored in the Control Unit. These scenes are accessible via Wallstations and/or Control Interfaces.
• Light levels fade smoothly between scenes. Fade time can be set differently for each scene, between 0-59 sec. or 1-60 min. Fade time from Off is capped at 5 sec.

• Meets IEC 801-2. Tested to withstand 15kV electrostatic discharge without damage or memory loss.
• Power failure memory automatically restores lighting to the scene selected prior to power interruption.
• Faceplate snaps on with no visible means of attachment.

• Low-voltage type Class 2 (PELV) wiring connects Control Units, Wallstations, and Control Interfaces.
• Up to 8 Control Units may be linked to control up to 64 zones.
• Up to 16 total Wallstations and Control Interfaces may be added for a total of 24 control points.

• 32-104°F (0-40°C). Relative humidity less than 90% non-condensing.

GRAFIK Eye 4000 Series Slider Control Unit

• Controls up to 8 zones of lighting.
• Provides pushbutton recall of a single lighting scene.
• Stores up to 12 scenes that can be recalled using an optional Access Control.
• Includes default “panic” scenes (full-on)
• Allows full-range dimming plus slide-to-off using zone sliders.
• Provides a user-selectable Master Slider.
• Controls virtually any light source via dimming panels.
• Mounts in a standard U.S. wallbox.

• Control 3, 4, 6 or 8 zones of lighting.

• GRAFIK Eye Wallstations
• GP and LP Dimming Panels

Specifications

• Low-voltage type Class 2 (PELV) Operating voltage: 24VDC.

Controls lighting sources with a smooth, continuous Square Law dimming curve via GP and LP Dimming Panels.

• 12 user-programmable slider scenes plus 2 panic scenes and off.
• Light levels fade smoothly between scenes. Fade time can be set differently for each scene, between 0-59 sec. or 1-60 min. Fade time is not adjustable for panic scenes.

• Meets IEC 801-2. Tested to withstand 15kV electrostatic discharge without damage or memory loss.
• Power failure memory automatically restores lighting to the scene selected prior to power interruption.
• Faceplate snaps on with no visible means of attachment.

• Low-voltage type Class 2 (PELV) wiring connects Control Units, Wallstations, and Control Interfaces.
• Up to 8 Control Units may be linked to control up to 64 zones.
• Up to 16 total Wallstations and Control Interfaces may be added for a total of 24 control points.

• 32-104°F (0-40°C). Relative humidity less than 90% non-condensing.

Faceplate Color and Finish Options

A variety of color and finish options are available for GRAFIK Eye 3000 and GRAFIK Eye 4000, to accent any décor. All GRAFIK Eye 3000 and 4000 units are available with a translucent top lid. All metal faceplates have a translucent top lid.

Architectural Matte

white
(WH)

beige
(BE)

ivory
(IV)

gray
(GR)

brown
(BR)

black
(BL)

Designer Gloss

white
(GWH)

light almond
(GLA)

almond
(GAL)

ivory
(GIV)

Satin Matte

midnight
(MN)

taupe
(TP)

snow
(SW)

eggshell
(ES)

biscuit
(BI)

limestone
(LS)

stone
(ST)

desert stone
(DS)

terracotta
(TC)

bluestone
(BG)

hot
(HT)

merlot
(MR)

sienna
(SI)

greenbriar
(GB)

sea glass
(SG)

mocha stone
(MS)

gold stone
(GS)

palladium
(PD)

plum
(PL)

turquoise
(TQ)

Standard Metal Finish

satin brass
(SB)

bright brass
(BB)

bright chrome
(BC)

Anodized Aluminum

clear anodized
(CLA)

black anodized
(BLA)

brass anodized
(BRA)

Special Metal Finish

antique brass
(QB)

antique bronze
(QZ)

satin chrome
(SC)

satin nickle
(SN)

bright nickle
(BN)