Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Sanctuary Series















SSE 10


757.498.6118 Ext - 109SSE 10 - Call for pricing - 10-inch 400 watt Loudspeaker

Downloads

PDFSSE 10 Spec Sheet (pdf)


The SSE is a new enclosure series featuring high power ratings with custom components, a sleek look and a unique, snap-in metal grille. The SSE 10 is a two-way system featuring the highly acclaimed Peavey 14XT™ titanium compression driver with the diverse Sound Guard™ IV tweeter protection network and a maximum performance 10" woofer for a smooth response.

The SSE 10 is rated at 400 Watts program and 800 Watts peak. This lightweight speaker system is ideal for smaller venues where space is at a premium. Connections are made using a four-pin Neutrik® Speakon® or paralleled two-position terminal block for additional cabinets.

The SSE 10 incorporates flying points on the top of the unit and mounting points on the bottom for utilizing the Peavey VersaMount™ 70 mounting bracket. The SSE series is available in black, off-white and natural finishes.

Features

  • Two-way sound reinforcement enclosure
  • Designed for permanent install
  • Available in three finishes: black, off-white or natural
  • Premium 10" woofer
  • Peavey 14XT™ titanium compression driver
  • Sound Guard™ IV tweeter protection network
  • Seven flying points (six 3/8" for suspension and one ¼" for angle adjustment)
  • Mounting point for VersaMount™ 70 bracket
  • 13 mm Birch plywood construction

Architectural and Engineering Specifications

The loudspeaker system shall have an operating bandwidth of 80 Hz to 17 kHz. The nominal output level shall be 95 dB when measured at a distance of one meter with an input of one watt. The nominal impedance shall be 8 ohms. The maximum program power handling shall be 400 watts with a peak power input of at least 800 watts and a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 90 degrees in the horizontal plane and 60 degrees in the vertical plane. The outside dimensions shall be 19.63 inches high by 15.09 inches wide by 12.12 inches deep. The weight shall be 29 pounds. The loudspeaker system shall be a model SSE 10.


Specifications
Frequency Response (±3dB) 80 Hz–17 kHz Power Handling 200 W cont. / 400 W prog. / 800 W peak
Frequency Range (-10dB) 60 Hz–17 kHz Box Tuning Frequency 78 Hz
Sensitivity 1 W/1 m 95 dB Crossover Frequency 2100 Hz
Max SPL/ 1m (calc) 124 dB Nominal Impedance 8 Ω
Coverage (HxV) 90° x 60° Minimum Impedance 6 Ω
Transducers (LF/HF) 10" premium / 14XT Input Connections (1) 4-pin Neutrik Speakon, (1) two-position terminal strip
Enclosure Material 9-ply Birch plywood w/ textured acrylic finish and cloth covered metal grille Mounting Provisions (6) 3/8"-16 threaded mounting points, (1) ¼"-20 threaded mounting point on back-bottom, (4) ¼"-20 threaded mounting points on bottom for Versamount
Dimensions (HxWxD) 49.8 x 38.3 x 30.8 cm
(19.6" x 15.1" x 12.1")
Weight 13.2 kg (29 lbs)
Purchasing
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or
Accessories