Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Peavey















SP 118


757.498.6118 Ext - 109SP 118 - Call for pricing - 18-inch 1200 watt - 00586560

Downloads

PDFSP 118 Specifications (pdf)


The SP 118 is a subwoofer designed to enhance the low end in SP and other full-range speaker systems. Other uses include bass guitar, keyboard and drum monitoring.

The enclosure is constructed of Aspen hardwood plywood with internal bracing covered in a heavy-duty, textured Hammertex™ covering. A powder-coated, perforated steel grille covers the front of the enclosure. Recessed steel handles on either side provide portability. A pole guide for support of a pole-mounted, high-pass enclosure is provided on the top face of the SP 118. Rubber feet are provided on one side for horizontal use. Rubber feet and corner casters on the bottom and a corner handle on top make moving the enclosure an easy, one-person operation.

Inputs are at the rear of the enclosure, and consist of two ¼" jacks and one four-pin Neutrik® Speakon® jack. All inputs are in parallel, with the +1 and -1 pins of the Neutrik jack connected to the Pro Rider® driver and other jacks.

This low frequency enclosure is comprised of a single 18" Pro Rider subwoofer driver in a vented alignment. The Pro Rider driver delivers superior performance due to its advanced cooling system, large 4" voice coil with edge-wound aluminum wire and Kevlar® composite cone. This design provides strong bass extension and high power handling to complement a full-range sound system.

As the SP 118 does not include a passive subwoofer crossover, input should be electronically filtered for subwoofer applications. In addition, for high power operation, a high-pass filter set at 35 to 40 Hz and 12 to 24 dB Butterworth should be used to improve performance and reliability.

Features

  • One 18" Pro Rider® Black Widow® woofer with Kevlar®/carbon fiber cone and field-replaceable basket, flat-wound 4" voice coil, and cast-frame basket
  • One four-pin Neutrik® jack and two ¼" jack inputs
  • Pole-mount stand adapter
  • Aspen hardwood enclosure
  • Hammertex durable covering material
  • New grille
  • Mounted casters for easy transport

Architectural and Engineering Specifications

The loudspeaker system shall have an operating bandwidth of 49 Hz to 300 Hz. The nominal output level shall be 98.0 dB when measured at a distance of one meter with an input of one watt. The nominal impedance shall be 8.0 ohms. The maximum continuous power handling shall be 600 watts, maximum program power of 1,200 watts and a peak power input of at least 2,400 watts, with a minimum amplifier headroom of 3 dB. The outside dimensions shall be 32.29 inches high by 20.80 inches wide by 29.88 inches deep. The weight shall be 107 pounds. The loudspeaker system shall be a Peavey model SP 118.


Specifications
Frequency Response (±3dB) 49 Hz–300 Hz Power Handling 600 W cont. / 1200 W prog. / 2400 W peak
Frequency Range (-10dB) 34 Hz–300 Hz Box Tuning Frequency 38 Hz
Sensitivity 1 W/1 m 98 dB Crossover Frequency 90 Hz
Max SPL/ 1m (calc) 132 dB Nominal Impedance 8 Ω
Coverage (HxV) Omnidirectional Minimum Impedance 6.5 Ω
Input Connections (2) ¼" phone, (1) 4-pin Neutrik Speakon Enclosure Material Aspen Plywood w/ Hammertex™ finish
Transducers (LF) Pro Rider 1808-8 ALCP
Dimensions (HxWxD) 82.0 x 52.8 x 75.9 cm
(32.3" x 20.8" x 29.9")
Weight 48.5 kg (107 lbs)
Purchasing
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or
Accessories