Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Peavey















Peavey XR 8300


757.498.6118 Ext - 109XR 8300 - Call for pricing - 2x300 Watt Console w/ FLS - 00512560

Downloads

PDFXR 8300/8600 Manual (pdf)


The XR 8300 features new improved low noise mic preamps, multi point clip sampling and a new subsonic filter to prevent low frequency power robbing. New graphic equalizers have multi-Q bandwidth to allow some filters to perform feedback control while others perform tone control and have Peavey’s patented FLS (Feedback Locating System).

Features

  • 2x300 watts per channel at 4 ohms
  • 8 improved, low-noise mic preamps
  • 10 line inputs
  • 48V phantom power
  • 3-band EQ, monitor send and effects send on each channel
  • 25 dB pad on channels 1-6
  • Signal and Clip indicator on each channel
  • Dual Main or Main/Mon power amp mode switch
  • Dedicated 7-band graphic for mains and monitors with FLS®
  • DDT™ speaker protection
  • DSP based effects with parameter control
  • Channel mute switch
  • Rugged plastic case

Specifications
Operating Levels
Mic Input Sensitivity w/ pad -34 to +14 dBu XLR
Line Input Sensitivity w/ pad -2 to +46 dBu TRS
Tape Input -26 to +21 dBu RCA
TRS Output (nom./max.) +4 dBu / +21 dBu
RCA Output (nom./max.) -10 dBu / +10 dBu
Gain
Mic Input 60 dB
Line Input 30 dB
Frequency Response (+0/-1dB)
To Main Output 20 Hz–20 kHz
To Power Amp Output 40 Hz–20 kHz
Distortion
THD @ 20Hz–20kHz < 0.01%
THD @ 1 kHz < 0.005% typ.
Common Mode Rejection
CMRR @ 1 kHz 60 dB
Crosstalk @ 20Hz–20kHz
Adjacent Channel > 80 dB
Left to Right Outputs > 70 dB
Hum and Noise (22Hz–22kHz unweighted)
Mic EIN -122 dBu
Residual Noise - Main -102 dB
Residual Noise - Monitor -98 dB
S/N Ratio > 90 dB
Connection Impedances
Mic Inputs 2 kΩ
Line Inputs 22 kΩ
Outputs 600 Ω
Equalization
Max. Boost/Cut ± 12 dB
Filter Frequencies 80, 250, 500, 1k, 2k, 4k, 10k Hz
Physical
Dimensions (HxWxD) 30.5 x 53.3 x 31.4 cm (12.0" x 21.0" x 12.4")
Weight 17.3 kg (38 lbs)
Power Amplifier Specifications
Frequency Response (+0/-1dB) 20 Hz–20 kHz
THD @ 1 kHz < 0.02%
DDT Dynamic Range > 26 dB
DDT Max. Distortion for 6dB overload < 0.5% THD
Hum and Noise 95 dB
Rated Power 300W into 4Ω / 215W into 8Ω
Input Sensitivity 1.225 Vrms
Input Impedance 11 kΩ
Damping Factor @ 1 kHz, 4Ω > 100
Power Requirement 120V AC, 60 Hz or 220-240V AC, 50/60 Hz; 360 W
Purchasing
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or