Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Peavey















Impulse 7


757.498.6118 Ext - 109Impulse 7 - Call for pricing - (Black) - 00585010
757.498.6118 Ext - 109Impulse 7 - Call for pricing - (White) - 00585020

Downloads

PDFImpulse 7 Specifications (pdf)


An excellent indoor/outdoor mini 2-way speaker system that is perfect for any application from foreground music to speech reinforcement. The Impulse 7 has a hi-fi sound character with great clarity which is ideal for music systems in bars, taverns, arenas, lounges, arcades or anywhere multi-channel, multi-speaker sound systems are required. This speaker utilizes a specially designed 6.5" woofer and a 1 1/8" square planar dynamic ribbon tweeter, a combination that will provide up to 106 dB SPL and handle up to 320 watts peak when coupled with its sophisticated internal crossover. The surface area of the planar diaphragm is 1.7 times that of a 1" dome tweeter, and the drive coils are affixed directly to the planar diaphragm. This creates a situation where the planar tweeter has a drive factor advantage of approx. 12X over that of a dome tweeter, resulting in faster transients and lower distortion than the typical dome tweeter.

Its trapezoidal high impact polypropylene cabinet is nearly indestructible. A perforated aluminum grille protects the weather-resistant drivers from tampering. With six threaded inserts and optional mounting hardware, this speaker can be wall or ceiling mounted, flown or used in arrays. With a mic stand adaptor on the side, it can also be used on stage just as easily. It is available in black (with a black grille) or white (with a white grille).

Features

  • Full-range two-way loudspeaker system
  • 160 watts program, 320 watts maximum output
  • Hi-Fi sound character
  • 6.5" high performance woofer
  • 1 1/8" planar ribbon tweeter
  • Magnetically shielded
  • Molded polypropylene cabinet
  • Slots to allow interlocking of additional units
  • 6 threaded mounting points
  • Drivers protected by an aluminum grille
  • Small & lightweight with an unobtrusive appearance
  • Weather resistant for outdoor use
  • Mic stand adapter included on the side
  • Available in black or white

Architectural and Engineering Specifications

The loudspeaker system shall have an operating bandwidth of 69 Hz to 20 kHz. The nominal output level shall be 87 dB when measured at a distance of one meter with an input of one watt. The nominal impedance shall be 8 ohms. The maximum continuous power handling shall be 80 watts, maximum program power of 160 watts and a peak power input of at least 320 watts, with a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 105 degrees in the horizontal plane and 95 degrees in the vertical plane. The tweeter shall be a planar dynamic ribbon type, paired with a high performance 6.5" woofer. The outside dimensions shall be 11.5 inches high by 7.5 inches wide by 6.88 inches deep. The weight shall be 8 pounds. The loudspeaker system shall be a Peavey model Impulse 7.


Specifications
Frequency Response (±3dB) 98 Hz–20 kHz
Frequency Range 69 Hz–20 kHz
Sensitivity 1 W/1 m 87 dB SPL, (2.83 V input)
Max SPL/ 1m (calc) 106 dB SPL continuous / 112 dB SPL peak
Coverage (HxV) 105° x 95°
Power Handling 80 W cont. / 160 W prog. / 320 W peak
Box Frequency 100 Hz
Crossover Frequency 3.2 kHz
Nominal Impedance 8 Ω
Connectors Screw terminals & a ¼" phone jack
Enclosure Material Polypropylene w/ textured finish and Perforated aluminum grille
Mounting Provisions Flying via Versamount 35 or SV 605
Dimensions (HxWxD) 29.2 x 19.1 x 17.5 cm (11.5" x 7.5" x 6.88")
Weight 3.6 kg (8 lbs)
Purchasing
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or
Accessories