Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Sanctuary Series















Sanctuary Series SA 4200


757.498.6118 Ext - 109SA 4200 - Call for pricing - Sanctuary Power Amplifier

Downloads

PDFSA4200 Manual (pdf)

PDFSA4200 Specs (pdf)


The SA-4200 power amp furthers Peavey’s commitment to making pro audio easy and cost effective for worship centers of all sizes. The SA-4200 features four channels rated at 200 Watts each into 4 Ohms or 70 Volts (selectable in two-channel pairs). This versatility makes the SA-4200 ideal for delivering adequate power to both main and balcony/fill speakers, as well as other applications that may require multiple audio zones, such as cry rooms or paging systems in larger houses of worship.

Exclusive, patent-pending Peavey Auto Delay DSP technology makes setting up delayed balcony and fill speakers systems a quick, painless process. DSP Auto Delay measures the audio delay between the main speakers and fill speakers and automatically sets the time delay necessary for the audio to seem synchronous—eliminating the frustrating delay and phasing problems experienced in many houses of worship.

Features

  • 200 Watts per channel @ 4 Ohms or 70 Volts
  • Exclusive, patent-pending Auto Delay measures and sets delay for fill speakers
  • Four-channel power amp system
  • DDT™ protection circuitry
  • Two-rack-space design
  • Cooled via two-speed fan
  • Front panel LED indicators for signal and clip on each channel

Specifications
Low Z Mode70 Volt Mode
4 Ω8 Ω16 Ω70 Volt140 Volt
Rated Output Power - all channels driven 200 W 130 W - 200 W -
Bridged Output Power - 400 W 260 W - 400 W
Minimum Load Impedance (Dual/Bridged) 4 Ω / 8 Ω 25 Ω / 50 Ω
Voltage Gain - ref. 1 kHz 26 dB 34 dB
Frequency Response (+0/-1dB, @ 1W) < 10 Hz–35 kHz 80 Hz–30 kHz
Frequency Response (+0/-3dB, @ rated power) 18 Hz–30 kHz 60 Hz–15 kHz
Input Sensitivity @ rated power 1.42 V 1.62 V - 1.42 V
Input Impedance (balanced/unbalanced) 20 kΩ / 10 kΩ 20 kΩ / 10 kΩ
THD @ rated power < 0.05% < 0.05%
IMD-SMPTE - 60 Hz, 7 kHz < 0.10% < 0.10%
Noise and Hum (A-weighted) -88 dB -88 dB
Damping Factor > 140 > 400
Input CMRR @ 1 kHz -60 dB -60 dB
Current Consumption @ rated power 15.5 A 10.2 A - 13.7 A
Current Consumption @ 1/3 power 9.8 A 6.4 A - 8.7 A
Current Consumption @ 1/8 power 6.6 A 4.2 A - 5.9 A
Current Consumption - Idle 0.5 A 0.9 A
Thermal Emission @ 1/3 power 3110 BTU/hr 2035 BTU/hr - 2655 BTU/hr
Thermal Emission @ 1/8 power 2365 BTU/hr 1500 BTU/hr - 2080 BTU/hr
Power Requirement 100V, 120V, 230-240V AC; 50–60 Hz
Indicator LEDs 4 Clip, 4 Signal, 1 Power
Protection Over-Temperature, DC, turn on/off transients, incorrect load, subsonic, short-circuit
Connectors (input) (4) female XLRs - line inputs; (1) female XLR - test microphone
Connectors (output) (2) 4-position barrier strips - speaker outputs; (1) male XLR - reference output
Construction 16 GA steel reinforced w/ 12 GA rack ears
Dimensions (HxWxD) 8.84 x 48.3 x 43.3 cm (3.5" x 19.0" x 17.1")
Weight 18.1 kg (40 lbs)
Purchasing
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or