Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Peavey















Peavey PV 3800


757.498.6118 Ext - 109PV 3800 - Call for pricing - Power Amplifier - 00513140

Downloads

PDFPV 3800 Manual (pdf)


Add a 3,800-watt PV 3800 amp to your Bi-Pack system for a tri-amped system! The highest-power PV Series power amp utilizes a crossover specially tailored for subwoofers and the high power necessary to drive them. Load Fault Correction circuitry along with the famous DDT™ speaker protection and Turn On/Turn Off protection allow operation with greater efficiency, even under difficult loads and power conditions. The PV 3800 connects to a PV 1600 Bi-Pack through a simple ¼" or XLR cable.

Features

  • 2-rack-space, 2-channel power amp with DDT protection
  • Turn On/Turn Off protection and FLS (Fault Load Correction)
  • 1300 watts per channel at 4 ohms
  • 775 watts per channel at 8 ohms
  • 2650 watts bridged at 8 ohms
  • Twin temperature-dependant variable-speed fans

Specifications
4 Ω8 Ω
Rated Output Power - 1 kHz, <0.05% THD, Dual Channel 1300 W 775 W
Rated Output Power - 1 kHz, <0.05% THD, Sing. Channel 1500 W 875 W
Bridged Output Power - 1 kHz, <0.1% THD - 2650 W
Maximum RMS Voltage Swing 93 V
Voltage Gain 32 dB
Power Bandwidth (+0/-3dB, @ rated power) 10 Hz–35 kHz
Frequency Response (+0/-2dB, @ 1W) 10 Hz–100 kHz
Input Sensitivity ±3% for 1 kHz 1.88 V
Input Impedance - balanced 15 kΩ
Crosstalk @ 1 kHz, rated power > -55 dB
Phase Response @ rated power +5° to -12°
THD @ rated power < 0.1%
Slew Rate > 15 V/μs
Hum and Noise (A-weighted) > -108 dB
Damping Factor @ 20 Hz–1 kHz > 500:1
Input CMRR @ 1 kHz > -55 dB
Power Requirement 240V, 230V or 120V AC; 50-60 Hz
Current Draw @ 1/8 power 1185 W 720 W
Current Draw @ 1/3 power 2975 W 1835 W
Cooling Two front panel temperature dependent variable speed 80 mm DC fans
Controls 2 front panel attenuators, rear panel Mode switches
Indicator LEDs 2 DDT, 2 Signal, 2 Active
Protection Thermal, DC, turn-on bursts, subsonic, incorrect loads
Connectors Combi XLR & 6.3 mm phone input, Speakon® and Binding speaker output, 15 amp IEC mains connector
Construction 14 GA steel w/ cast front panel and cast handles
Dimensions (HxWxD) 8.89 x 48.3 x 37.6 cm (3.5" x 19.0" x 14.8")
Weight 19.5 kg (43 lbs)
Purchasing
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or