|
Products
|
Peavey GPS 3500 GPS 3500 - Call for pricing - Power Amplifier - 00481410Downloads
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
GPS Series Manual (pdf)| Specifications | |||
| 2 Ω | 4 Ω | 8 Ω | |
| Output Power - 1 kHz, 0.1% THD, Dual Channel | - | 1200 W | 775 W |
| Rated Output Power - 20 Hz–20 kHz, 0.02% THD | - | 1050 W | 750 W |
| Bridged Output Power - 1 kHz, 0.1% THD | - | - | 2400 W |
| Maximum RMS Voltage Swing | 89 V | ||
| Voltage Gain - ref. 1 kHz | 32 dB | ||
| Power Bandwidth (+0/-3dB, @ rated power) | 10 Hz–40 kHz | ||
| Frequency Response (+0/-3dB, @ 1W) | 10 Hz–100 kHz | ||
| Input Sensitivity | 1.4 V | 1.7 V | - |
| Input Impedance - balanced | 20 kΩ | ||
| Crosstalk @ 1 kHz, rated power | > -75 dB | ||
| THD @ rated power | - | < 0.1% | < 0.08% |
| IMD-SMPTE - 60 Hz, 7 kHz | < 0.1% | ||
| Slew Rate | > 40 Vμs | ||
| Hum and Noise (A-weighted) | > -115 dB | ||
| Damping Factor @ 20 Hz–1 kHz | > 325:1 | ||
| Input CMRR @ 1 kHz | > -65 dB | ||
| Current Draw @ 1/8 power, 4Ω | 11.66 A @ 120 V | ||
| Power Consumption | > 1400 W | ||
| Cooling | Two 80 mm DC fans, off until heatsinks reach 45° C, then temperature dependant variable speed | ||
| Controls | 2 front panel attenuators | ||
| Indicator LEDs | 2 DDT/Clip, 2 Signal, 2 Power | ||
| Protection | Thermal, DC, turn-on bursts, subsonic, incorrect loads | ||
| Connectors | XLR input, 6.3 mm phone output patch, Speakon® and Binding Post speaker output, IEC mains input | ||
| Construction | 16 GA steel reinforced w/ 12 GA rack ears | ||
| Dimensions (HxWxD) | 13.3 x 48.3 x 43.2 cm (5.23" x 19.0" x 17.0") | ||
| Weight | 23.3 kg (51.3 lbs) | ||
For pricing options and packages, contact us at
800.937.9021 Ext - 109, Or
800.937.9021 Ext - 109, Or