|
Products
|
Peavey CS 1400 CS 1400 - Call for pricing - Power Amplifier - 00511140Downloads
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CS 1400/2000 Manual (pdf)| Specifications | |||
| 2 Ω | 4 Ω | 8 Ω | |
| Rated Output Power - 1 kHz, <0.1% THD, Dual Channel | 700 W | 500 W | 330 W |
| Rated Output Power - 1 kHz, <0.1% THD, Single Channel | 785 W | 550 W | 345 W |
| Bridged Output Power - 1 kHz, <0.1% THD | - | 1400 W | - |
| Maximum RMS Voltage Swing | 61 V | ||
| Voltage Gain - ref. 1 kHz | 32 dB | ||
| Power Bandwidth (+0/-3dB, @ rated power) | 10 Hz–35 kHz | ||
| Frequency Response (+0/-1dB, @ 1W) | 10 Hz–25 kHz | ||
| Input Sensitivity | 0.910 V | 1.13 V | 1.26 V |
| Input Impedance - balanced | 20 kΩ | ||
| Crosstalk (A-weighted) | > -74 dB | ||
| THD @ rated power | < 0.2% | < 0.2% | < 0.15% |
| IMD-SMPTE - 60 Hz, 7 kHz | < 0.1% | ||
| Slew Rate | 17 V/μs | ||
| Hum and Noise (A-weighted) | > -107 dB | ||
| Damping Factor @ 20 Hz–400 Hz | > 400:1 | ||
| Input CMRR @ 1 kHz | > -101 dB | ||
| Power Requirement | 240V, 230V or 120V AC; 50–60 Hz | ||
| Current Draw @ 1/8 power | 745 W | 505 W | 325 W |
| Current Draw @ 1/3 power | 1930 W | 1235 W | 815 W |
| Cooling | Two 80 mm DC fans, dual speed operation | ||
| Controls | 2 front panel attenuators, rear panel mode switch, rear panel DDT™ switch | ||
| Indicator LEDs | 2 DDT/clipping, 2 Status/Power, 2 Signal | ||
| Protection | Temp, DC, turn-on transients, subsonic, improper load or shorts | ||
| Connectors | Combi XLR & 6.3 mm input, Speakon® and Binding Post speaker output, IEC mains connector | ||
| Construction | 16 GA steel w/ cast aluminum front panel and steel grille | ||
| Dimensions (HxWxD) | 8.89 x 48.3 x 37.6 cm (3.5" x 19.0" x 14.8") | ||
| Weight | 14.83 kg (32.7 lbs) | ||
For pricing options and packages, contact us at
800.937.9021 Ext - 109, Or
800.937.9021 Ext - 109, Or
More Info