Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Electro-Voice















EVID 6.2


757.498.6118 Ext - 109EVID 6.2 - Call for pricing - Dual 6-inch woofers

Downloads

PDFEVID 6.2 Spec Sheet (pdf)

PDFEVID Series Manual (pdf)

PDFEVID Series Brochure (pdf)


The EVID 6.2 is an extended-range loudspeaker ideal for indoor and outdoor applications requiring high-quality sound. Its extended range and smooth bass provide ample SPL levels in larger environments such as shopping malls, sports bars, health clubs, and so on. Additionally, the flexible Strong-Arm-Mount™ (SAM) system provides the versatility to accommodate any installation challenge. EV’s unique 6" dual woofer design delivers crisp and clean program for the utmost in listening experience regardless of the location.

The 6.2’s three-dimensional elliptic baffle symmetrically locates the 1" Ti direct radiator high-frequency element with a Coherent Coverage Waveguide in front of and between the 6" low-frequency drivers. The careful shaping, location, and 10° splaying of the LF units provide coverage control by the resulting line array. Lobing is controlled by physically "shadowing" the LF tranducers from each other over the bandwidth where they would normally exhibit interference. EVID’s mounting system provides greater range of aiming angles in both horizontal and vertical planes than other types. The curved grille features designed-in weather resistance and a hidden leash for safety.

All models are available in black or white, and can easily be painted to match the décor. Transformer versions are also available for constant voltage systems.

Features

  • Dual 6" Two-Way, Extended Range High Output Speaker
  • Line-array enhanced coverage control
  • Organic, unobtrusive shape
  • Strong-Arm-Mount™ for easy, flexible aiming
  • Full-bandwidth overload protection
  • Weather resistant - Conforms to Mil Spec 810 and IEC 529 IP 34
  • Dual LF transducers for extended bass and greater power handling and output
  • Ti direct-radiator HF transducer, Neodymium structure
  • High sensitivity
  • Magnetically shielded
  • Zinc-plated grilles
  • Transformer Versions
  • Spring Terminal input connections
  • Internal Crossover

Architectural and Engineering Specifications

The loudspeaker shall be a two-way system consisting of two 6" (152 mm) low-frequency transducers, a 1" (25 mm) high-frequency transducer with a Coherent Coverage Waveguide, and a frequency-dividing network installed in a vented, line-array enclosure. The network shall include a passive limiter for both the low-frequency and high-frequency transducers. The loudspeaker system shall meet the following performance criteria: Power handling, 300 watts of EIA RS-426A continuous pink noise (6 dB crest factor); Frequency response, 62 Hz to 20 kHz (-10 dB from rated sensitivity); Pressure sensitivity, 94 dB at one watt, 200 Hz to 10 kHz at one meter; Impedance, 8 ohms nominal, 6 ohms minimum. The high-frequency transducer shall drive a waveguide to cover evenly 100° horizontally by 90° vertically. The enclosure shall be molded of acrylic butyl styrene. The enclosure shall be 16.5" (419 mm) high, 9" (228 mm) wide, 11.75" (298 mm) deep. The finish shall be a paintable black or white. The grille shall be zinc plated, powder coated for corrosion resistance, and restrained with a safety leash. The loudspeaker shall be adjustable over a range of 100° horizontally and 90° vertically. The support bracket shall be low profile and integral with the enclosure. The system shall be weather resistant to MIL Spec 810 and IEC 529 IP 34 test conditions. The surface mount loudspeaker shall be the Electro-Voice® EVID model 6.2.


Specifications
Frequency Response (-10dB) 62 Hz–20 kHz Power Handling 150 W cont. / 300 W prog. / 600 W peak
Sensitivity 1 W/1 m 94 dB Crossover Frequency 1600 Hz
Max SPL/ 1m (calc) 122 dB "t" Wattage Taps 70V/100V: 15W, 30W, 60W
Coverage (HxV) 100° x 80° Nominal Impedance 8 Ω
Swing x Rotation 100° x 90° Minimum Impedance 6 Ω
Transducers (LF/HF) (2) 6" / 1" Protection Full System
Terminals Phoenix Connector Weather Resistance Meets Mil Spec 810 humidity, salt spray, temperature and UV, and IEC 529 IP 34 splashproof ratings
Enclosure Material ABS (paintable)
Dimensions (HxWxD) 41.9 x 22.8 x 29.8 cm
(16.5" x 9.0" x 11.8")
Weight 5.3 kg (12 lbs)
Purchasing
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or