Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Electro-Voice















Eliminator i Double


757.498.6118 Ext - 109Eliminator i Double - Call for pricing - Dual 15-inch two-way 600 watt speaker

Downloads

PDFEliminator Series Brochure (pdf)

PDFEliminator i Double Specifications (pdf)


The Electro-Voice Eliminator ii™ is a high-peak output, high-efficiency two-way stage system. The dual 15" low-frequency/horn-loaded constant-directivity high-frequency system incorporates elements of Ring-Mode Decoupling (RMD™). RMD techniques substantially improve vocal fundamental intelligibility and produce an “up front” tonality capable of cutting through even the most difficult acoustic environments.

The Eliminator ii enclosure has a unique design that presents a very minimal frontal cross section while still maintaining substantial internal volume. A newly developed handle concept allows for extremely comfortable transportation from any orientation. The design is lightweight, but very rugged and features a heavy metal grille and highly stylized corner protection.

The heart of the Eliminator ii’s high performance design is the combination of a high-excursion low-frequency suspension system with Electro-Voice’s unique Ring-Mode Decoupling. All loudspeaker drivers exhibit mechanical resonance modes that add their own time-domain or ringing-mode colorations. These colorations limit and reduce overall system intelligibility. The Eliminator ii uses RMD™ to control several fundamental ringing modes. The result is substantially improved vocal range intelligibility and system “openness”.

Two 15" drivers provide very high output at the lower frequencies. When extended high output low-frequency operation is required, performance can be further enhanced by biamping the Eliminator ii with the Eliminator i Sub. Vented enclosures offer excellent power handling and low distortion in the lowest octave of rate operation. However, it is always advisable to filter material below enclosure tuning to further improve system output and headroom. The Eliminator ii should be high-pass filtered to reduce subsonic material below 40 Hz.

Features

  • Dual 15" Two-Way High-output Stage System
  • RMD™ for Improved Clarity and Presence
  • High-Q horn projects well even in difficult acoustic environments
  • DH2010A High Frequency Transducer
  • 2x DL15BFH Low Frequency Transducers
  • Parallel Neutrik® NL4 input connections
  • Internal Crossover
  • Industrial-grade black carpet covers the strong RoadWood enclosure

Architectural and Engineering Specifications

The loudspeaker system shall consist of two 15-inch low-frequency transducers in a vented enclosure. The high-frequency section shall be a compression driver with a pure titanium diaphragm coupled to a 1-inch throat diameter to a constant-directivity horn having a horizontal included angle of 60° and a vertical included angle of 40° nominal. The loudspeaker shall have a rated frequency response of 50 Hz to 20 Hz ±3 dB and a long-term rated average power handling of 600 watts (EIA RS-426-A). The system sensitivity shall be 100 dB when measured in an anechoic environment with a 1-watt input with a calibrated measurement microphone located 1 meter from the system axis. The nominal impedance shall be 4 ohms. The system shall have parallel Neutrik® NL4MP connectors.


Specifications
Frequency Response (±3dB) 50 Hz–20 kHz Power Handling 600 W cont. / 1200 W prog. / 2400 W peak
Frequency Range (-10dB) 45 Hz–20 kHz Crossover Frequency 1600 Hz
Sensitivity 1 W/1 m 100 dB Rec. High-Pass Freq. 40 Hz (18dB/oct.)
Max SPL/ 1m (calc) 134 dB Nominal Impedance 4 Ω
Coverage (HxV) 60° x 40° Minimum Impedance 3.3 Ω
Enclosure Tuning 46 Hz Enclosure Finish black carpeted
Input Connectors Parallel Neutrik model NL4MP Transducer Complement (HF/LF) DH2010A, HP64M constant directivity / (2) DL15BFH
Dimensions (HxWxD) 116.8 x 44.2 x 61.6 cm
(46" x 17.4" x 24.25")
Weight 54 kg (119 lbs)
Purchasing
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or