Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Electro-Voice















Electro-Voice CPS 4.10


757.498.6118 Ext - 109CPS 4.10 - Call for pricing - 4-ch. 1000 W Power Amplifier

Downloads

PDFCPS Series Brochure (pdf)

PDFCPS 4-Channel Manual (pdf)


The CPS 4.10 is a four-channel amplifier from Electro-Voice featuring groundbreaking Class-D technology for maximum amp efficiency and minimized heat dissipation in 19" racks.

Each channel individually provides transformer-less, switchable output characteristics, which enable specific channels to achieve maximum performance. Power into 2 Ohms, 4 Ohms, 70V or 100V lines are all possible, and no transformer is required. In Hi-Z operation (70V or 100V), a 50 Hz high-pass filter provides protection against loudspeaker transformer saturation. Additionally, amplifier channels can be bridged in pairs for double output power.

The contractor-friendly CPS 4.10 also features Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power switching via remote contact closure, and rear level controls.

A module slot for the optional RCM-810 remote control module provides control network functionality, allowing for remote system diagnostics via IRIS-Net software. In addition, using the RCM-810’s Variable Load Drive (VLD) feature can tailor the amplifier’s output power to match every load from 2 Ohms up to 10 Ohms in steps of 0.1 Ohms.

Features

  • Class-D design for high-efficiency and low heat dissipation
  • Flexible matching for Low-Z and High-Z applications
  • Optional remote control via IRIS-Net
  • Remote Power On/Off
  • Phoenix Type Inputs
  • Programmable power-on delay
  • High-pass filter (HPF)
  • Dynamic Limiter
  • Complete Protection Package

Specifications
Low Impedance Mode High Impedance Mode
2 Ω 4 Ω 8 Ω 70 V / 10 Ω 100 V / 20 Ω
Max. Midband Output Power
THD=1%, 1 kHz, 4 ch. driven
1000 W 1000 W 500 W
VLD: 1000 W
1000 W
Rated Output Power
THD<0.3%, 20 Hz–20 kHz, 4 ch. driven
900 W900 W450 W
VLD: 900 W
900 W
Max. Bridged Output Power - THD=1%, 1 kHz - 2000 W 2000 W 2000 W
Maximum RMS Voltage Swing - THD=1%, 1 kHz 45 V 63 V 63 V
VLD: 89 V
70 V 100 V
Power Bandwidth
THD=1%, 1 kHz, half power @ rated load
10 Hz–25 kHz 50 Hz–25 kHz
Voltage Gain - ref. 1 kHz 32 dB 33 dB 36 dB
Input Sensitivity - rated power, 1 kHz +3.0 dBu (1.1 V)+6.0 dBu (1.55 V)+6.0 dBu (1.55 V)+6.0 dBu (1.55 V)
THD @ rated output power - MBW=80 kHz, 1 kHz < 0.05%
IMD-SMPTE - 60 Hz, 7 kHz < 0.05%
DIM-30 - 3.15 kHz, 15 kHz < 0.02%
Maximum Input Level +22 dBu (9.76 Vrms)
Crosstalk - ref. 1 kHz, rated output power < -80 dB
Frequency Response (±1 dB, ref. 1 kHz, 8Ω load) 15 Hz–30 kHz
Input Impedance - active balanced 20 kΩ
Damping Factor - 1 kHz, 8 Ω > 240
Slew Rate 28 V/μs
Signal to Noise Ratio (A-weighted) 101 dB 103 dB 103 dB 104 dB 106 dB
Output Noise (A-weighted) < -66 dBu< -65 dBu< -65 dBu< -65 dBu< -64 dBu
Output Stage Topology Class D
Power Requirement 240V-220V, 120V or 100V; 50–60 Hz
Power Consumption - 1/8 max output power 840 W
Protection Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Inrush Current Limiters, Turn-on Delay, Mains Circuit Breaker Protection, Mains Over/Under-voltage Protection
Cooling Front-to-rear, temperature controlled fans
Ambient Temp. Limits 5° C–40° C (40° F–105° F)
Safety Class I
Dimensions (HxWxD) 8.81 x 48.3 x 42.2 cm (3.5" x 19.0" x 16.6")
Weight 11.1 kg (24.3 lbs)
Purchasing
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or