|
Products
|
Electro-Voice CPS 2.6 MK IIDownloads
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Specifications | |||
| 2 Ω | 4 Ω | 8 Ω | |
| Max. Midband Output Power - THD=1%, 1 kHz, Dual Channel | 900 W | 600 W | 380 W |
| Rated Output Power - THD<0.1%, 20 Hz–20 kHz | - | 500 W | 250 W |
| Max. Single Channel Output Power - Dynamic-Headroom, IHF-A | 1700 W | 950 W | 480 W |
| Max. Single Channel Output Power - Continuous, 1 kHz | 1200 W | 750 W | 420 W |
| Max. Bridged Output Power - THD=1%, 1 kHz | - | 1800 W | 1200 W |
| Maximum RMS Voltage Swing - THD=1%, 1 kHz | 65.1 V | ||
| Power Bandwidth - THD=1%, 1 kHz, half power @ 4Ω | < 10 Hz–30 kHz | ||
| Voltage Gain - ref. 1 kHz | 32.0 dB | ||
| Input Sensitivity - Rated power @ 8Ω, 1 kHz | +3.1 dBu (1.11 Vrms) | ||
| THD @ rated output power - MBW=80 kHz, 1 kHz | < 0.03% | ||
| IMD-SMPTE - 60 Hz, 7 kHz | < 0.1% | ||
| DIM-30 - 3.15 kHz, 15 kHz | < 0.05% | ||
| Maximum Input Level - ref. 1 kHz | +21 dBu (8.69 Vrms) | ||
| Crosstalk - ref. 1 kHz, rated output power | < -80 dB | ||
| Frequency Response (±1 dB, ref. 1 kHz) | 10 Hz–40 kHz | ||
| Input Impedance - active balanced | 20 kΩ | ||
| Damping Factor - 1 kHz | > 300 | ||
| Slew Rate | 26 V/μs | ||
| Signal to Noise Ratio (A-weighted) | > 107 dB | ||
| Output Noise (A-weighted) | < -71 dBu | ||
| Output Stage Topology | Class AB | ||
| Power Requirement | 240V, 230V, 120V or 100V; 50–60 Hz | ||
| Power Consumption - 1/8 max output power @ 4Ω | 700 W | ||
| Protection | Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn-on delay | ||
| Cooling | Front-to-rear, 3-stage-fans | ||
| Ambient Temp. Limits | 5° C–40° C (40° F–105° F) | ||
| Safety Class | I | ||
| Signal Processing | Lo-Cut 50 Hz / 18 dB, switchable | ||
| Dimensions (HxWxD) | 8.81 x 48.3 x 42.2 cm (3.5" x 19.0" x 16.6") | ||
| Weight | 14.8 kg (32.6 lbs) | ||
757.498.6118 Ext - 109, Or

