Loyola Enterprises

A veteran and minority owned SDB Certified Business.

Electro-Voice















Electro-Voice CP 3000S


757.498.6118 Ext - 109CP 3000S - Call for pricing - Power Amplifier

Downloads

PDFCP Series Brochure (pdf)

PDFCP 3000S / 4000S Manual (pdf)


Electro-Voice’s Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a new compact, lightweight format. This is made possible by incorporating a highly efficient Class-H design, which results in considerably less heat being generated. This allows the overall size of the amplifier to be reduced substantially without sacrificing performance or reliability.

The audio performance of CP-Series power amps are simply extraordinary. The new switchmode power supply technology, completely designed from scratch and the consistent use of Class-H technology provide extensive headroom far above the stated nominal output and conspicuous reduction in leakage power at the same time.

The CP 3000S is not only the first Precision Series amplifier to use a switch-mode power supply, but also the first switch-mode amplifier with EV’s Precision Series sound. With up to 2 x 1600 watts into 2 ohms and 2 x 1100 watts into 4 ohms, it is both powerful and light weight, at only 18.0 lbs (8.15 kg). The CP 3000S is state-of-the-art for all kinds of applications. It is specifically designed to allow for long-term driving of low loads into subwoofers without stress. The CP 3000S’s reliability and its pleasing, rich sound make it the first choice for all mid- and hi-range speaker cabinets.

The employed switching power supply combines the headroom-advantage of a transformer power amplifier with low weight of a pulsed power supply unit resulting in an improved performance-to-weight ratio. Special attention had been given to high efficiency and interference immunity already in the designing stage with the result that trouble-free operation of CP-Series power amps is possible even in EMV-critical environments.

Being protected against thermal and electrical overload, short circuit and the occurrence of HF/DC at the outputs, Electro-Voice CP-Series power amps fulfill even the most demanding requirements of Pro-Audio touring applications. Back-EMF-Protection eliminates the risk of the output transistors being damaged by electrical energy back-feed. The power outputs are switched via relay with a time delay during soft-start and an inrush current limiter additionally prevents mains fuses from blowing.

The recessed mounted dB-scaled level controls ensure reliable protection against mechanical damage. These particularly precise, secure to operate detent-potentiometers are located on the front panel. CP-Series power amps provide the opportunity for retrofitting an internal analogue signal processor board with x-over and filter functions.

The easily readable LED display provides a quick overview of the power amp’s current operational status. The power outputs CHANNEL A, CHANNEL B and BRIDGED OUT are carried out as extremely durable Speakon-type connectors. Also located on the rear panel is a Ground-lift switch, which helps eliminating ground-noise loops by separating the power amp’s enclosure from the circuit ground. In normal operation, all CP-Series power amps are capable of driving loads as low as 2 ohms. In Mono-Bridged mode the allowable minimum load is 4 ohms.

Features

  • 2 x 1600W/2 Ohms
  • High Efficient Class-H Design
  • 2 U Rack Space
  • Only 18.0 lbs (8.15 kg)
  • Complete Protection Package
  • Dynamic Limiter

Specifications
2 Ω4 Ω8 Ω
Max. Midband Output Power - THD=1%, 1 kHz, Dual Channel 1600 W 1100 W 600 W
Rated Output Power - THD=0.1%, 20 Hz–20 kHz - 900 W 450 W
Max. Single Channel Output Power - Dynamic Headroom, IHF-A 2600 W 1400 W 720 W
Max. Single Channel Output Power - Continuous, 1 kHz 2100 W 1300 W 660 W
Max. Bridged Output Power - THD=1%, 1 kHz - 3200 W 2200 W
Maximum RMS Voltage Swing - THD=1%, 1 kHz 78 V
Power Bandwidth - THD=1%, 1 kHz, half power @ 4Ω 10 Hz–60 kHz
Voltage Gain - ref. 1 kHz 32.0 dB
Input Sensitivity - Rated power @ 8Ω, 1 kHz +5.8 dBu (1.51 Vrms)
THD @ rated output power - MBW=80 kHz, 1 kHz < 0.05%
IMD-SMPTE - 60 Hz, 7 kHz < 0.02%
DIM-30 - 3.15 kHz, 15 kHz < 0.05%
Maximum Input Level - ref. 1 kHz +22 dBu (9.76 Vrms)
Crosstalk - ref. 1 kHz, rated output power < -80 dB
Frequency Response (±1 dB, ref. 1 kHz) 15 Hz–40 kHz
Input Impedance - active balanced 20 kΩ
Damping Factor - 1 kHz > 300
Slew Rate 35 V/μs
Signal to Noise Ratio (A-weighted) 107 dB
Output Stage Topology Class H
Power Requirement 240V, 230V, 220V, 120V or 100V; 50–60 Hz
Power Consumption 820 W
Protection Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn-on delay
Cooling Front-to-rear, 3-stage fans
Ambient Temp. Limits 5° C–40° C (40° F–105° F)
Safety Class I
Dimensions (HxWxD) 8.81 x 48.3 x 38.7 cm (3.5" x 19.0" x 15.2")
Weight 8.15 kg (18.0 lbs)
Purchasing
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or