Loyola Enterprises

A veteran and minority owned SDB Certified Business.

DBX















DBX Driverack 220i


757.498.6118 Ext - 109DBX Driverack 220i - Call for pricing - Sound Processor

Downloads

PDFDBX Driverack 220i Cut Sheet (pdf)

PDFDBX Driverack 220i Brochure (pdf)

PDFDBX Driverack 220i Manual (pdf)


Designed from the ground up to provide state-of-the-art signal processing, the DriveRack® 220i is the perfect tool for any fixed-install application. With a full complement of processing features and Mic/Line inputs the DriveRack 220i can provide both system and microphone processing. Featuring the new, patent-pending Advanced Feedback Suppression (AFS™) algorithm, equalization, dynamics processing, delay, matrix mixing, and bandpass filters, the DriveRack 220i will exceed your expectations.

The DriveRack 220i is piloted from the intuitive DriveWare GUI that offers both Configuration and Control of the processing modules. Modules can be accessed, edited and saved as part of programs. Processing modules can be linked between the channels for true stereo processing. If independent processing is desired, parameters can be copied from one channel to the next to ensure that setup is quick and easy. Stored programs can be loaded from either the front panel or from wall mounted Zone Controllers. Zone Controllers can also be used for output muting or adjusting output volumes.

Features

  • Advanced Feedback Suppression (AFS™)
  • Graphic and Parametric EQ
  • Compressor
  • Limiter
  • Auto Gain Control
  • Noise Gating
  • De-Esser
  • Ducker
  • Bandpass Filters
  • 2x2 Matrix Mixer
  • 1.3 Seconds of Delay
  • RS-232 PC GUI control
  • Mic/Line Inputs
  • Wall Panel Control
  • Security Lockout

Specifications
Analog Inputs
Number of Inputs (2) Switchable Mic or Line
Input Connectors Female XLR line inputs and Euroblock
Input Type Electronically balanced, RF filtered
Input Impedance >50 kΩ
Max. Input Level +20 dBu
Input CMRR >40 dB, typ >55 dB @ 1 kHz
Mic Pre Gain 30 to 60 dB
Mic EIN < 110 dB, 22Hz-22kHz, 150 Ω
Phantom Power 15 VDC
Analog Outputs
Number of Outputs 2 Total
Output Connectors Male XLR and Euroblock
Output Type Electronically balanced, RF filtered
Output Impedance (bal./unbal.) 120 Ω / 60 Ω
Max. Output Level +20 dBu
A/D Performance
Type dbx Type IV™ conversion system
Dynamic Range Line (A-weighted/unweighted) >113 dB / >110 dB
Type IV Dynamic Range (A-weighted/unweighted) >119 dB / >117 dB
Sample Rate 48 kHz
D/A Performance
Dynamic Range (A-weighted/unweighted) 112 dB / 109 dB
System Performance
Dynamic Range (A-weighted/unweighted) >110 dB / >107 dB
THD+Noise @ 1 kHz 0.003% typ. @ +4 dBu, 0 dB gain
Frequency Response (±0.5dB) 20 Hz–20 kHz
Interchannel Crosstalk >110 dB, 120 dB typical
Crosstalk input to output >80 dB
Propagation Delay 0.6 msec
Operating Voltage 100 VAC 50/60 Hz, 120 VAC 60 Hz, 230 VAC 50/60 Hz
Power Requirements 12 Watts
Physical
Weight 2.5 kg (5.5 lbs)
Dimensions (HxWxD) 4.45 x 48.3 x 19.7 cm (1.75" x 19" x 7.7")
Safety Certifications UL 6500, IEC 60065, E 60065, EN 55013
Purchasing
For pricing options and packages, contact us at
757.498.6118 Ext - 109, Or